5bar scara Problem configuring z probe using fsr switch
-
@gnmrc_ said in 5bar scara Problem configuring z probe using fsr switch:
@fcwilt ok I’m gonna send it to you, but I have no idea in how to do it. Can I link them here in some way?
Are they large?
You can attach files to messages here but I don't know if there is a size limit.
Perhaps you can email them?
Or I have a DropBox account. Maybe there is a way you can leave them there. I would have to research how to do that.
Frederick
-
@fcwilt Yes they are too big to link them here, the dropbox could be the best way.
-
@gnmrc_ said in 5bar scara Problem configuring z probe using fsr switch:
@fcwilt Yes they are too big to link them here, the dropbox could be the best way.
Do you have a Dropbox account? I know how to share files (yours to me) but I don't know how to allow you to put files into my Dropbox.
Frederick
-
@fcwilt no but we can use a google drive in the same way right?
-
@gnmrc_ said in 5bar scara Problem configuring z probe using fsr switch:
@fcwilt no but we can use a google drive in the same way right?
I don't know. I have it but to do certain things you have to sign up for a paid account. It's not much it's still another $72 annually - minimum.
Do you have Google Drive?
Frederick
Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6
-
@fcwilt yes, it would be simpler to link them there
-
This post is deleted! -
@Phaedrux said in 5bar scara Problem configuring z probe using fsr switch:
This thread is a bit long now. Can you create a summary post of the issue as it is currently and I can pass it along to DC42 to see if he has any suggestions.
@Phaedrux do you have any news from DC42?
-
@gnmrc_ Yes, can you please start a new thread with the core of the current problem. Include your config.g and homing file.
-
@Phaedrux I have created the recap post this is the link.
-
Thank you. With Formnext going on it may be a few days before DC42 can take a look.
-
@Phaedrux yeah I imagine but I am not in a hurry.
-
undefined gnmrc_ referenced this topic
-
The problem is fixed, G92 command was in a bad position, it was such a simple solution...., sorry to have bothered you so much.
-
undefined Phaedrux marked this topic as a question
-
undefined Phaedrux has marked this topic as solved
-
Glad you were able to get it sorted out.
-
@gnmrc_ Thanks for confirming that you have found the solution. Don't hesitate to ask if you have more questions.
