Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Deux2 wifi board and fan output not working

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    4
    108
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ObiWan2Printundefined
      ObiWan2Print
      last edited by

      I had an accident where the wires on the extruder cooling fan was pulled out during a print. After the accident, I tried installing a new fan and could not get the fan to turn on. None of the fan power plugs seem to work. Is there a way to check if this can be fixed?

      droftartsundefined 1 Reply Last reply Reply Quote 0
      • droftartsundefined
        droftarts administrators @ObiWan2Print
        last edited by

        @ObiWan2Print check the fan fuse, most likely blown if no fans are working.

        Ian

        Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

        ObiWan2Printundefined 2 Replies Last reply Reply Quote 0
        • ObiWan2Printundefined
          ObiWan2Print @droftarts
          last edited by

          @droftarts Thanks! Fuse is blown. Will replace it and get back here with results.

          1 Reply Last reply Reply Quote 0
          • ObiWan2Printundefined
            ObiWan2Print @droftarts
            last edited by

            @droftarts The fuse was the problem. Thanks!

            1 Reply Last reply Reply Quote 1
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA