Core XY IDEX
-
Hi All,
I'm building a new 3d printer using many of digital dentist's concepts. I want to make this one an IDEX build. First, can I reuse my Duet 2, or do I need to buy a Duet 3? I'd setup endstops on opposite ends, but would I need one between the extruders? Here is a picture of what I'm thinking for the motor setup. Would this work? Thanks.
M
-
You should be able to get by with a Duet2 but a Duet3 opens options like toolboards via CAN FD which massively simplifies wiring on an IDEX.
You don't need end stops between the tool heads; having one at minimum for the left and one at maximum for the right tool head works well.
-
Thank you.