Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    1XD not working

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    4
    145
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Shokiundefined
      Shoki
      last edited by

      Hi,

      I'm facing a problem with a new 1XD.
      I can't seem to make it work.
      I replaced it in my system with a 3HC and it worked flawlessly, no problem with CAN communication.
      I replaced it with an old 1XD I took from an other printer and it's working no problem (but I need the old printer so i had to put it back !)

      I tried to fit a jumper to reset the board, as recommended in the documentation. It did not change anything.

      The thing that worries me the most is the fact that the status led is always off.
      The 5V red led and the blue VIN led are both turned on.

      It's a 1XD V1.1

      Is this a sign of dead board ? How can I diagnose/solve the problem ?

      Thanks in advance.

      chrishammundefined 1 Reply Last reply Reply Quote 0
      • chrishammundefined
        chrishamm administrators @Shoki
        last edited by chrishamm

        @Shoki Is your mainboard on v3.5.1? Does it show up in DWC -> Settings -> Machine-Specific -> Electronics? Also, does anything change if you have only CAN and power connected?

        Duet software engineer

        Shokiundefined 1 Reply Last reply Reply Quote 0
        • Shokiundefined
          Shoki @chrishamm
          last edited by

          @chrishamm the mainboard is installed with 3.5.0-rc.1. Same as the Duet Web Control.
          I don't see a line with 1XD (not the same as on my other printer, where there is one)

          Nothing is connected to the 1XD for now. Only power and CAN.

          chrishammundefined 1 Reply Last reply Reply Quote 0
          • chrishammundefined
            chrishamm administrators @Shoki
            last edited by

            @Shoki In that case it sounds like the 1XD is faulty, so let's exchange it. Please send an email to warranty@duet3d.com and CC your reseller. Include a link to this forum thread and the details of your original purchase. You'll receive a reply with a form to fill out.

            Duet software engineer

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA