Overview of .g files

[Falc.be]

I want to see a full list of possible g files than can be called from the firmware

Doesnt seem to be in the wiki

[Dougal1957]

http://reprap.org/wiki/Gcodes

[Falc.be]

those are the gcode. I asked if there was a list of the .g files

[deckingman]

AFAIK, all available .g files can be found in your .sys folder

[dc42]

And of course you can create your own GCode files and put them in the /macros folder to make them easy to run.

[Falc.be]

Let me put it another way

I am looking for a list of .g files that are predefined in the firmware like pause.g, home files, config.g etc

[deckingman]

@Falc.be:

Let me put it another way

I am looking for a list of .g files that are predefined in the firmware like pause.g, home files, config.g etc

I don't know how to put my answer any other way excepts maybe this:

Open your sys folder and there you will see a list of all the .g files.

[dc42]

There is a list at https://duet3d.com/wiki/SD_card_folder_structure.

[bot]

That list seems to not include the tool change g code files, so it doesn't appear to be a complete list.

I think Falc.be is looking for an exhaustive list of every g code filename that is or can be referenced by the firmware directly, in special circumstances.

Not a list of g code files on his sd card, and not the "minimum required" g code files.