Overview of .g files

Falc.be

I want to see a full list of possible g files than can be called from the firmware

Doesnt seem to be in the wiki

Dougal1957

http://reprap.org/wiki/Gcodes

Falc.be

those are the gcode. I asked if there was a list of the .g files

deckingman

AFAIK, all available .g files can be found in your .sys folder

dc42

And of course you can create your own GCode files and put them in the /macros folder to make them easy to run.

Falc.be

Let me put it another way

I am looking for a list of .g files that are predefined in the firmware like pause.g, home files, config.g etc

deckingman

@Falc.be:

Let me put it another way

I am looking for a list of .g files that are predefined in the firmware like pause.g, home files, config.g etc

I don't know how to put my answer any other way excepts maybe this:

Open your sys folder and there you will see a list of all the .g files.

dc42

There is a list at https://duet3d.com/wiki/SD_card_folder_structure.

bot

That list seems to not include the tool change g code files, so it doesn't appear to be a complete list.

I think Falc.be is looking for an exhaustive list of every g code filename that is or can be referenced by the firmware directly, in special circumstances.

Not a list of g code files on his sd card, and not the "minimum required" g code files.