Overview of .g files
-
I want to see a full list of possible g files than can be called from the firmware
Doesnt seem to be in the wiki
-
-
those are the gcode. I asked if there was a list of the .g files
-
AFAIK, all available .g files can be found in your .sys folder
-
And of course you can create your own GCode files and put them in the /macros folder to make them easy to run.
-
Let me put it another way
I am looking for a list of .g files that are predefined in the firmware like pause.g, home files, config.g etc
-
Let me put it another way
I am looking for a list of .g files that are predefined in the firmware like pause.g, home files, config.g etc
I don't know how to put my answer any other way excepts maybe this:
Open your sys folder and there you will see a list of all the .g files.
-
There is a list at https://duet3d.com/wiki/SD_card_folder_structure.
-
That list seems to not include the tool change g code files, so it doesn't appear to be a complete list.
I think Falc.be is looking for an exhaustive list of every g code filename that is or can be referenced by the firmware directly, in special circumstances.
Not a list of g code files on his sd card, and not the "minimum required" g code files.