6XD + SD card reader

[tecno]

@dc42 @droftarts

Thank you guys for your kind support!

Cheers
Bengt

[droftarts]

@tecno Great! I'll add a section for external card readers to the PanelDue page on the wiki, now you've proved it works. MicroSD card readers are wired slightly differently, as the pinout is different.

Ian

[tecno]

@droftarts

Good we got it sorted out. Now I have installed a new router that is up and running so soon I will get this macine on LAN as well.

Will need to add 2 external USB ports, where can I plugin the second USB on either 6XD or 7i if possible.
OpenPnP will be run over USB to controll the macine and I would like to have anoter USB port for memory stick.

Cheers
Bengt

[droftarts]

@tecno I don't quite understand what you want to do. You can't plug in a USB memory stick into a Duet. The USB on a Duet board can only be used for serial communication.

Ian

[tecno]

@droftarts
OK

Assume same goes for 7i as regards USB?

[droftarts]

@tecno said in 6XD + SD card reader:

Assume same goes for 7i as regards USB?

Yes.

Ian

[dc42]

@tecno the 6HC and 6XD have only one USB port and OpenPNP expects it to be in device mode. So connecting a USB stick to the Duet will not be possible. Why do you want to connect a USB stick to the Duet instead of to the Pi ?

[tecno]

@dc42
Hello,
Just having all ports at my disposal.

No Pi here

[tecno]

@tecno

[tecno]

[tecno]

@dc42 @droftarts
Now the tedious work to get config edited and I/Os wired, assuming I am going to stumble on sopme issues, so questions may arise.

Cheers
Bengt