PanelDue Firmware
-
@elmoret I forgot because I couldn’t solve the problem. I’m sorry. I've been working on this for days. I'm not very good with using the site either; I'm learning slowly. Please excuse me.
-
I've just created the page in the photo and added buttons to it. I want to change the width and height of these buttons, but the current button structure doesn't allow it. How can I do this? This is exactly what I need help with. Thank you.
-
@rkutun you can already change the width of the button, you pass it as the pw parameter to the SingleButton class.
There is currently no facility to change the height of a screen element. To add such a facility you would need to start by adding a height parameter to the SingleButton constructor. You could adopt the convention that a zero value means automatic height (the existing behaviour) and a nonzero value means you want exactly that height. Store the parameter in the SingleButton object and change SingleButton::GetHeight to return that stored value if it is nonzero.
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42 First of all, thank you for your response. I will try this and inform you.
-
I adjusted the button heights, but the button labels are not centered. How can I fix this? @dc42 -
Line 748 places the top of the text at the font height plus one pixel below the top of the button.
You'll need to change this line to place the top of the text at the height of the text box divided by 2, less the font height divided by two.
Ian
Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard
-
@droftarts I solved the problem, but now there is another problem. Now my problem is that the height of the textField does not change. I could not figure out for what purpose these were made. Why is the height parameter not requested when drawing something. There is no height parameter in PanelDue software.
-
@droftarts I can't adjust the height of the section highlighted in blue. Could you help me with this? I've been looking into it myself but haven't found a solution. I don't want it to take too long. -
@rkutun I'm not a programmer, so I can't really help. Really only @dc42 or possibly @mfs12 (though he doesn't seem to be around much now) can help you. Or just keep digging until you find it.
Any reason you are using this fork https://github.com/maxgerhardt/PanelDueFirmware rather than the master https://github.com/Duet3D/PanelDueFirmware ? Using a different fork makes it even more difficult to help you.
Ian
-
@droftarts Thank you anyway. But I'm waiting for their help. I have no other option.
-
help please +++
-
You're effectively asking someone to do development work for you for free. You've gotten a fair bit of (free) help so far. If that's not enough, you could consider contacting Duet3D to set up paid development work.
-
@elmoret Thank you!
-
@rkutun if you want to make all objects have configurable height then you will need to add the height variable to the base class DisplayField instead of adding it to the SingleButton class. Then you would need to add a suitable parameter to the constructors of DisplayField and all classes derived from DisplayField (including SingleButton) and pass the value down to the base class, just as the width parameter (called pw in most of them) is.
As @elmoret says, providing detailed development assistance is beyond the free support that we provide.
