Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    no external plugins work in 3.5.4

    Scheduled Pinned Locked Moved Solved
    Plugins for DWC and DSF
    7
    16
    484
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jltxundefined
      jltx @chrishamm
      last edited by

      @chrishamm I attempted to do that on the lite version. I used the RPI imager and entered all the credentials. Something did not go right because the first boot hung. I pulled the SD card and, thinking it never connected to network because I could not reach it via ssh, I added the wpa_supplicant file. It worked on the next boot. I read that wpa file doesn't work on bookworm so not sure what changed for the next boot. One thing that did work is it copied the backup *.g files over from the boot partition and the printer started up. See next.

      My full install also has issues. It booted to the Duet splash screen for a while doing things and eventually dumped me into some linux desktop environment. The printer never started nor DWC. Investigating I found that none of the *.g files were copied over from the boot partition. So I sftp'd them over and got the printer going. I have to start the DWC manually on every boot, it never starts on its own. Also, I cannot access some of the *.g files through DWC because it says I don't have permission. I used -P to preserve attributes but something went awry. Not sure what the proper chown or chmod to use to fix it.

      I can install some plug-ins in this new setup but not all. For example the btn_mgr and release_manager fail prerequisite check, but say I need the version I have. Input shaping says the manifest is bad. So still stuck at an incomplete state.

      BTW, in both cases, the lite and full, the img I downloaded from the document page is inconsistent in that it installs a mix of 3.5.4 and 3.5.3 sw. I have to immediately apt update/upgrade to get things aligned.

      jltxundefined 1 Reply Last reply Reply Quote 0
      • jltxundefined
        jltx @jltx
        last edited by

        Ok I did the following which unblocks me for macros. Let me know if it is wrong.
        chown -R dsf:dsf /opt/dsf/sd/*

        What do I need to change to start DWC automatically?

        here is the M122 from the new system:

        M122
        === Diagnostics ===
        RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (SBC mode)
        Board ID: RNXYU-8296U-D65J0-40KMW-2503Z-ZP7HW
        Used output buffers: 1 of 40 (17 max)
        === RTOS ===
        Static ram: 103496
        Dynamic ram: 117260 of which 0 recycled
        Never used RAM 18068, free system stack 135 words
        Tasks: SBC(2,ready,1.7%,813) HEAT(3,nWait 1,0.1%,323) Move(4,nWait 6,0.0%,285) CanReceiv(6,nWait 1,0.0%,939) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,334) TMC(4,nWait 6,1.5%,81) MAIN(2,running,95.9%,757) IDLE(0,ready,0.0%,29) AIN(4,delaying,0.8%,264), total 100.0%
        Owned mutexes: HTTP(MAIN)
        === Platform ===
        Last reset 04:23:49 ago, cause: power up
        Last software reset at 2025-02-04 08:05, reason: User, Platform spinning, available RAM 22812, slot 2
        Software reset code 0x6000 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task SBC Freestk 0 n/a
        Error status: 0x00
        MCU revision 3, ADC conversions started 11872475, completed 11872474, timed out 0, errs 0
        MCU temperature: min 16.2, current 23.7, max 26.4
        Supply voltage: min 0.2, current 24.0, max 24.0, under voltage events: 0, over voltage events: 0, power good: yes
        Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/8/8, gc cycles 0
        Events: 0 queued, 0 completed
        Driver 0: standstill, SG min 0, read errors 0, write errors 0, ifcnt 12, reads 62715, writes 12, timeouts 0, DMA errors 0, CC errors 0
        Driver 1: standstill, SG min 0, read errors 0, write errors 0, ifcnt 19, reads 62708, writes 19, timeouts 0, DMA errors 0, CC errors 0
        Driver 2: standstill, SG min 0, read errors 0, write errors 0, ifcnt 19, reads 62708, writes 19, timeouts 0, DMA errors 0, CC errors 0
        Driver 3: standstill, SG min 0, read errors 0, write errors 0, ifcnt 19, reads 62708, writes 19, timeouts 0, DMA errors 0, CC errors 0
        Driver 4: standstill, SG min 0, read errors 0, write errors 0, ifcnt 10, reads 62717, writes 10, timeouts 0, DMA errors 0, CC errors 0
        Driver 5: standstill, SG min 0, read errors 0, write errors 0, ifcnt 19, reads 62708, writes 19, timeouts 0, DMA errors 0, CC errors 0
        Driver 6: standstill, SG min 0, read errors 0, write errors 0, ifcnt 19, reads 62708, writes 19, timeouts 0, DMA errors 0, CC errors 0
        Date/time: 2025-02-04 17:01:41
        Cache data hit count 4294967295
        Slowest loop: 233.24ms; fastest: 0.11ms
        === Storage ===
        Free file entries: 20
        SD card 0 not detected, interface speed: 0.0MBytes/sec
        SD card longest read time 0.0ms, write time 0.0ms, max retries 0
        === Move ===
        DMs created 83, segments created 3, maxWait 3604118ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
        no step interrupt scheduled
        Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
        === DDARing 0 ===
        Scheduled moves 14, completed 14, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
        === DDARing 1 ===
        Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
        === Heat ===
        Bed heaters 0 -1 -1 -1, chamber heaters 3 -1 -1 -1, ordering errs 0
        === GCodes ===
        Movement locks held by null, null
        HTTP* is doing "M122" in state(s) 0
        Telnet is idle in state(s) 0
        File is idle in state(s) 0
        USB is idle in state(s) 0
        Aux is idle in state(s) 0
        Trigger* is idle in state(s) 0
        Queue is idle in state(s) 0
        LCD is idle in state(s) 0
        SBC is idle in state(s) 0
        Daemon is idle in state(s) 0
        Aux2 is idle in state(s) 0
        Autopause is idle in state(s) 0
        File2 is idle in state(s) 0
        Queue2 is idle in state(s) 0
        Q0 segments left 0, axes/extruders owned 0x0000803
        Code queue 0 is empty
        Q1 segments left 0, axes/extruders owned 0x0000000
        Code queue 1 is empty
        === CAN ===
        Messages queued 142282, received 0, lost 0, errs 74830674, boc 0
        Longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 26 (min 26), ts 79150/0/0
        Tx timeouts 0,0,79149,0,0,63131 last cancelled message type 30 dest 127
        === SBC interface ===
        Transfer state: 5, failed transfers: 0, checksum errors: 0
        RX/TX seq numbers: 28567/36292
        SPI underruns 0, overruns 0
        State: 5, disconnects: 2, timeouts: 2 total, 2 by SBC, IAP RAM available 0x0cd20
        Buffer RX/TX: 0/0-0, open files: 0
        === Duet Control Server ===
        Duet Control Server version 3.5.4 (2024-11-25 17:32:26, 64-bit)
        HTTP+Executed:

        Executing M122
        Code buffer space: 4096
        Configured SPI speed: 8000000Hz, TfrRdy pin glitches: 2
        Full transfers per second: 22.43, max time between full transfers: 9506.9ms, max pin wait times: 4331.9ms/12.7ms
        Codes per second: 0.10
        Maximum length of RX/TX data transfers: 4436/936

        jltxundefined s0lsticeundefined 2 Replies Last reply Reply Quote 0
        • jltxundefined
          jltx @jltx
          last edited by

          Any help appreciated. After a lot of googling (too much stale info) I tracked down wayfire.ini for the latest firmware. I do have this file and it is set to autostart launch-dwc, yet it does not.

          T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
          • T3P3Tonyundefined
            T3P3Tony administrators @jltx
            last edited by

            @jltx it might be better to start with a fresh duetpi image and just move your configuration across.

            www.duet3d.com

            jltxundefined 1 Reply Last reply Reply Quote 0
            • s0lsticeundefined
              s0lstice @jltx
              last edited by

              @jltx Giving write permission to 'other', for the directories in /opt/dsf/sd helped for me, using:
              chmod o+w /opt/dsf/sd/*

              1 Reply Last reply Reply Quote 0
              • jltxundefined
                jltx @T3P3Tony
                last edited by

                @T3P3Tony That's how I got into this mess in the first place. I've actually done it twice already. I think the provided image might be misconfigured.

                stuartofmtundefined 1 Reply Last reply Reply Quote 0
                • stuartofmtundefined
                  stuartofmt @jltx
                  last edited by

                  @jltx

                  I've just recently recreated by printer and SBC from the Duet3D bookworm full image and have a clean (and working) system. So a couple of these may help:

                  Regarding DWC auto starting:

                  pi@srsender:~ $ cat  ~/.config/wayfire.ini
[autostart]
dwc=launch-dwc

pi@srsender:~ $ cat  ~/.config/labwc/autostart
# Start DWC on boot
launch-dwc &

                  regarding permissions, I've never seen rwe permissions needing to be changed, but I have seen ownership issues (with a "hand build")

                  pi@srsender:/home $ ls -l /opt
total 12
drwxr-xr-x 7 1001  127 4096 Nov 27 13:21 dsf
drwxr-xr-x 3 root root 4096 Nov 27 13:15 pigpio
drwxr-xr-x 4 root root 4096 Nov 27 13:26 WidevineCdm

pi@srsender:/home $ ls -l /opt/dsf
total 96
drwxr-xr-x 2 1001 127 77824 Feb 11 15:24 bin
drwxrwxr-x 2 dsf  dsf  4096 Feb 11 15:25 conf
drwxr-xr-x 6 dsf  dsf  4096 Feb 11 15:24 dwc
drwxr-xr-x 4 dsf  dsf  4096 Feb 11 15:24 plugins
drwxrwxr-x 9 dsf  dsf  4096 Jan 18 14:27 sd

                  The (rather) odd ones out are /opt/dsf and /opt/dsf/bin (I'd somehow expect them to be dsf:dsf too but that's not the case)

                  I'd make sure all the second level subdirectories are recursively set to the same ownership as the parent using

                  sudo chown -R [user]:[group] /opt/dsf/[subdir]

                  or just reinstall from the Duet3D bookworm image 😊

                  jltxundefined 1 Reply Last reply Reply Quote 1
                  • jltxundefined
                    jltx @stuartofmt
                    last edited by

                    @stuartofmt Thank you! The labwc/autostart file was completely missing. I added and now it boots correctly for the first time. I changed nothing under .config prior so I'm not sure how this got wedged.

                    jltxundefined 1 Reply Last reply Reply Quote 0
                    • jltxundefined
                      jltx @jltx
                      last edited by jltx

                      @chrishamm I think there is a race condition. Now that I have the missing file in place, the printer boots up in one of two states:

                      1. printer does not run config.g but DWC starts (rarely)
                        I have to soft restart printer to recover

                      2. printer starts correctly, DWC loads but blank screen (mostly)
                        I can hit CTRL-R which reloads page, re-syncs DWC which then works

                      Maybe there needs to be a small delay at the beginning of launch-dwc to allow printer to settle before establishing communication.

                      after scenario 2:
                      M122
                      === Diagnostics ===
                      RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (SBC mode)
                      Board ID: RNXYU-8296U-D65J0-40KMW-2503Z-ZP7HW
                      Used output buffers: 1 of 40 (17 max)
                      === RTOS ===
                      Static ram: 103496
                      Dynamic ram: 116756 of which 0 recycled
                      Never used RAM 21496, free system stack 208 words
                      Tasks: SBC(2,ready,1.5%,817) HEAT(3,nWait 1,0.1%,323) Move(4,nWait 6,0.0%,355) CanReceiv(6,nWait 1,0.0%,939) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,334) TMC(4,nWait 6,1.5%,110) MAIN(2,running,95.4%,776) IDLE(0,ready,0.7%,29) AIN(4,delaying,0.8%,264), total 100.0%
                      Owned mutexes: HTTP(MAIN)
                      === Platform ===
                      Last reset 00:12:36 ago, cause: power up
                      Last software reset at 2025-02-12 15:51, reason: User, Gcodes spinning, available RAM 21496, slot 0
                      Software reset code 0x6003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task SBC Freestk 0 n/a
                      Error status: 0x00
                      MCU revision 3, ADC conversions started 568229, completed 568227, timed out 0, errs 0
                      MCU temperature: min 16.1, current 26.6, max 26.8
                      Supply voltage: min 0.2, current 24.0, max 24.0, under voltage events: 0, over voltage events: 0, power good: yes
                      Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
                      Events: 0 queued, 0 completed
                      Driver 0: standstill, SG min 0, read errors 0, write errors 0, ifcnt 12, reads 3146, writes 12, timeouts 0, DMA errors 0, CC errors 0
                      Driver 1: standstill, SG min 0, read errors 0, write errors 0, ifcnt 13, reads 3145, writes 13, timeouts 0, DMA errors 0, CC errors 0
                      Driver 2: standstill, SG min 0, read errors 0, write errors 0, ifcnt 13, reads 3145, writes 13, timeouts 0, DMA errors 0, CC errors 0
                      Driver 3: standstill, SG min 0, read errors 0, write errors 0, ifcnt 13, reads 3144, writes 13, timeouts 0, DMA errors 0, CC errors 0
                      Driver 4: standstill, SG min 0, read errors 0, write errors 0, ifcnt 10, reads 3148, writes 10, timeouts 0, DMA errors 0, CC errors 0
                      Driver 5: standstill, SG min 0, read errors 0, write errors 0, ifcnt 13, reads 3145, writes 13, timeouts 0, DMA errors 0, CC errors 0
                      Driver 6: standstill, SG min 0, read errors 0, write errors 0, ifcnt 13, reads 3144, writes 13, timeouts 0, DMA errors 0, CC errors 0
                      Date/time: 2025-02-13 15:54:18
                      Cache data hit count 1688692589
                      Slowest loop: 6.84ms; fastest: 0.13ms
                      === Storage ===
                      Free file entries: 20
                      SD card 0 not detected, interface speed: 0.0MBytes/sec
                      SD card longest read time 0.0ms, write time 0.0ms, max retries 0
                      === Move ===
                      DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
                      no step interrupt scheduled
                      Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
                      === DDARing 0 ===
                      Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                      === DDARing 1 ===
                      Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                      === Heat ===
                      Bed heaters 0 -1 -1 -1, chamber heaters 3 -1 -1 -1, ordering errs 0
                      === GCodes ===
                      Movement locks held by null, null
                      HTTP* is doing "M122" in state(s) 0
                      Telnet is idle in state(s) 0
                      File is idle in state(s) 0
                      USB is idle in state(s) 0
                      Aux is idle in state(s) 0
                      Trigger* is idle in state(s) 0
                      Queue is idle in state(s) 0
                      LCD is idle in state(s) 0
                      SBC is idle in state(s) 0
                      Daemon is idle in state(s) 0
                      Aux2 is idle in state(s) 0
                      Autopause is idle in state(s) 0
                      File2 is idle in state(s) 0
                      Queue2 is idle in state(s) 0
                      Q0 segments left 0, axes/extruders owned 0x0000803
                      Code queue 0 is empty
                      Q1 segments left 0, axes/extruders owned 0x0000000
                      Code queue 1 is empty
                      === CAN ===
                      Messages queued 6643, received 0, lost 0, errs 3572342, boc 0
                      Longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 26 (min 26), ts 3783/0/0
                      Tx timeouts 0,0,3782,0,0,2859 last cancelled message type 4514 dest 127
                      === SBC interface ===
                      Transfer state: 5, failed transfers: 0, checksum errors: 0
                      RX/TX seq numbers: 27970/16824
                      SPI underruns 0, overruns 0
                      State: 5, disconnects: 1, timeouts: 1 total, 1 by SBC, IAP RAM available 0x0cd20
                      Buffer RX/TX: 0/0-0, open files: 0
                      === Duet Control Server ===
                      Duet Control Server version 3.5.4 (2024-11-25 17:32:26, 64-bit)
                      HTTP+Executed:

                      Executing M122
                      Code buffer space: 4096
                      Configured SPI speed: 8000000Hz, TfrRdy pin glitches: 0
                      Full transfers per second: 0.45, max time between full transfers: 5630.9ms, max pin wait times: 77.9ms/38.1ms
                      Codes per second: 0.00
                      Maximum length of RX/TX data transfers: 4436/936

                      jltxundefined 1 Reply Last reply Reply Quote 0
                      • jltxundefined
                        jltx @jltx
                        last edited by

                        OK, I may have inadvertently resolved it.

                        I found how to remove the desktop and boot to terminal using raspi-config. I wanted to understand the RAM cost. I have an RPi4b with 2GB RAM.

                        FYI:
                        in terminal mode after boot I have 1.5 GB free.
                        In desktop gui with DWC running at 1280x900 I have 960 KB free.

                        Anyway, after switching back to GUI mode everything boots as expected and DWC starts. So I suspect my config was whacked somehow (I touched nothing!) and running the rasp-config corrected the situation.

                        Sorry for all the bother.

                        1 Reply Last reply Reply Quote 1
                        • droftartsundefined droftarts marked this topic as a question
                        • droftartsundefined droftarts has marked this topic as solved
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA