Speed factor doesn't honor M203
-
Hi,
can please anyone confirm that if you crank up speed factor it will not honor max M203 speeds?
I have this
M203 X20000.00 Y20000.00 Z150.00 E15000.00 ; set maximum speeds (mm/min)and if i crank up the Speed factor it will got way over 333mm/s
-
firmware version?
-
3.6.0-beta.2
i know i know it is beta, but before i start changing versions I was just wondering if it is actually the case
-
Could you verify in 3.6 beta 4?
-
@Phaedrux said in Speed factor doesn't honor M203:
Could you verify in 3.6 beta 4?
printer is running now - thats why I asked if anyone else has the same issue.
-
There has been one report of probing speed not honoring the limit set by M203, so this may be related. Would be great if you could test on beta 4.
-
@Phaedrux do you know if Speed Factor overrides just the speed or acceleration too? especially m204?
-
@Aurimas the intention (and the actual behaviour AFAIK) is that the speed factor (M220):
- is applied to the F parameter in G0/1/2/3 moves
- does not affect anything else
- is not applied to commands in system macro files (homing files, pause/resume files, start.g, stop.g etc.)
- does not override or change the M203 machine limits (i.e. the speeds of moves will still be limited by the M203 parameters).
