3.6.0rc1 DWC baby stepping values incorrect value displayed

[moth4017]

in the DWC status window , displayes 0.03mm

but in the machine specific its set up as

[gloomyandy]

@moth4017 0.03 is simply 0.025 rounded to 2 decimal places. I don't see what the problem is here. I suppose arguably both displays should use the same number of decimal places, but I'm not sure it really matters.

[chrishamm]

@moth4017 The display precision is set by the number of decimal places to display for Z. If you increase it to three digits in the settings, your custom value should be displayed correctly.

[moth4017]

@chrishamm thanks i missed that on that general page