Need to run 11 stepper drivers

[gzcwnk]

Core XY+UV.

Z = 1
XY=2
UV=2
e3d Aero =1
Diamondhead 5 = 5

= 11 steppers

Duetwifi can only do 10.

I read somewhere about the "next generation" duetwifi, when is that proposed? or is there any consideration being given to a bigger expansion board? At the rate I am going with this build its 12months off anyway I suspect. At least finishing/using the UV gantry bit.

[elmoret]

Duet Wifi/Ethernet can do 12, the extra 2 are through the CONN_LCD port.

https://duet3d.dozuki.com/Wiki/Using_external_stepper_motor_drivers

[T3P3Tony]

I do love that this is now something that people need more and more. The WiFi can do 12, there is another thread on the forum where someone wants 13/14! A few years ago that would be pretty unthinkable!