New extruder stepper motor suggestion
-
I've gone to a regular E3D V6 away from the Titan Aero this weekend and realized I don't have what I think are truly suitable motors for the new extruders I'm putting on. (SeeMeCNC EZR) Most of what I have as spares are 800mA 1.8deg/step. On the Titan Aero with the 3:1 gearing, I used a 1A pancake.
So, any good suggestions for Bowden extruders that are on Amazon? 0.9deg/step and decent current.
EDIT: x16 microstepping with interpolation, ~96steps/mm, 800mA is my current setup and that's running 100% rated current to prevent slipping.
-
I've used these guys a few times.
https://www.omc-stepperonline.com/nema-17-stepper-motor
In particular this guy https://www.omc-stepperonline.com/hybrid-stepper-motor/nema-17-bipolar-09deg-46ncm-651ozin-2a-28v-42x42x48mm-4-wires-17hm19-2004s.html?mfp=149-step-angle[0.9]
Possibly overkill for an extruder, but works good as an axis motor.
-
-
Thanks to both of you.
-
I bought those motors, they are excellent. I can run them 100mm/sec for my filament swaps (2-1 adapter) no problem.
Thanks again.
-
@superjett Glad they worked out. I've been happy with them.
