M122 - how o disable it?
-
After running an M122 I notice that it will automatically execute on its own later. Sometimes this happens 10 or more times during a print. Firmware 1.21 (2018-03-21) but I've seen this on earlier releases too.
Is this an "issue" and is there a way to disable it without rebooting the Duet?
-
Hi Micheal, I have never seen this, I often call M122 to check things but its never run involuntarily for me. Are you calling it from the Gcode console or the PanelDue?
-
Sounds like this could almost be related to the multiple messages being echoes back when connecting to the DWC from multiple devices. Are you perhaps accessing the DWC from a phone and a PC?
-
@phaedrux said in M122 - how o disable it?:
Sounds like this could almost be related to the multiple messages being echoes back when connecting to the DWC from multiple devices. Are you perhaps accessing the DWC from a phone and a PC?
I agree Z that's the most likely explanation. The issue with serving multiple devices and one of them going offline without disconnecting is mostly fixed in the 2.0RC firmware builds.
