Communication Error (Unexpected token)

[dc42]

As you are using RC firmware, I suggest you upgrade to the 1.21 release, or to 2.0beta3.

[paboman]

ok, I just have updated to what i found in https://github.com/dc42/RepRapFirmware/releases/tag/2.0RC1

Firmware Version: 2.0(RTOS)RC1 (2018-05-02b1)
WiFi Server Version: 1.21RC5(16b1)
Web Interface Version: 1.21.1-RC1

should I also update the WIFI Server ? if yes where is the last version ?

thank you

[dc42]

Yes, latest WiFi server version is 1.21.

[whosrdaddy]

@dc42 said in Communication Error (Unexpected token):

Yes, latest WiFi server version is 1.21.

To add to David's answer: Wifi Server 1.21 download link

[paboman]

thank you !

[stavrosgmtl]

I am getting the same error. Two prints bombed so far.

Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 1.21 (2018-03-21)
WiFi Server Version: 1.21
Web Interface Version: 1.21

[dc42]

@stavrosgmtl said in Communication Error (Unexpected token):

I am getting the same error. Two prints bombed so far.

Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 1.21 (2018-03-21)
WiFi Server Version: 1.21
Web Interface Version: 1.21

WiFi disconnection errors don't in themselves affect printing, the print will just carry on.

[dc42]

@paboman said in Communication Error (Unexpected token):

thank you !

Did upgrading the firmware resolve your issue?

[paboman]

@dc42
Yes

[stavrosgmtl]

I downgraded to 1.20, i probably confused the error, will retest 1.21 later after my printing is done.