• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Cannot read file, error code 1

Scheduled Pinned Locked Moved
General Discussion
3
4
793
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Xenjamo
    last edited by 9 Sept 2018, 13:25

    Hi, Recently I added a heated bed to my printer. the heated bed works fine but now the printer stops printing randomly and relaying the message: Cannot read file, error code 1. Cancelled printing file Y-carriage_MGN9-H_MOUNT.gcode, print time was 0h 22m. It happens with any gcode file. And when I restart the print, it stops a the exact same point and with the same massage.

    I thought it was a corrupted sd card, so i replaced it, but the problem still persisted. Updating Firmware didnt work either - resulted in even more problems.
    While trying to dowload it via the web interface it stops about where the print stopped, followed with the duet losing connection.

    Does anyone have a clue as to what is going on? Or am I doing something wrong?

    config.g:0_1536328345396_config.g
    Log: https://gyazo.com/5026cdb079bf7277aab8f42fc3d95666

    Software Information:
    Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
    Firmware Electronics: Duet Ethernet 1.02 or later
    Firmware Version: 2.01(RTOS) (2018-07-26b2)
    Web Interface Version: 1.22.1

    1 Reply Last reply Reply Quote 0
    • undefined
      dc42 administrators
      last edited by 11 Sept 2018, 10:46

      Normally I would say that message means a faulty SD card or a fault in the SD card hardware. But the fact that it happens at the same place every time is odd. So I am wondering whether the firmware on your Duet is corrupted. Try installing firmware 2.02RC2 from https://github.com/dc42/RepRapFirmware/releases.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • undefined
        Xenjamo
        last edited by 14 Sept 2018, 18:55

        Hello again. I dont think the firmware was corrupt since i reinstalled it many times to counter this issue. What I've done now, is empting all the old gcode files. I had like a GB of gcodes on the SD card. I have tested the last couple of days to see if it happens again, but so far it works normally.

        undefined 1 Reply Last reply 24 Jun 2019, 05:38 Reply Quote 0
        • undefined
          Vlad @Xenjamo
          last edited by 24 Jun 2019, 05:38

          @xenjamo I tried cleaning on mine and this doesn't help at all. Probably QC issues with card readers.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA