• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

DuetWiFiFirmware minor release 1.15c

Scheduled Pinned Locked Moved
Firmware installation
11
79
12.2k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Sakey
    last edited by 11 Sept 2016, 16:51

    Mines connected 3x fsr to JohnSL board to the duet via e0 endstop I think. Set at 4 on m558.

    Worked fine in 1.15b, upgraded to 1.15c no longer working so downgraded again and back up and running. Hope that helps DC!

    1 Reply Last reply Reply Quote 0
    • undefined
      Toddimus
      last edited by 12 Sept 2016, 02:01

      Mine is connected to the E0 endstop.
      Jumper on JohnSL board is set for NC

      M558 P4 X0 Y0 Z0
      M574 X2 Y2 Z2 S0 // hall effect switches at the top of each delta tower
      G31 X0 Y0 Z0 P500

      Thanks DC

      1 Reply Last reply Reply Quote 0
      • undefined
        sga
        last edited by 12 Sept 2016, 05:51

        Do you ever sleep?Thx for the update!!!

        1 Reply Last reply Reply Quote 0
        • undefined
          lignumaqua
          last edited by 9 Dec 2016, 16:07 12 Sept 2016, 15:38

          Not sure if this is a Duet WiFi firmware issue, or chrishamm's web page. Running 1.15c with web interface 1.12 on a brand new Duet WiFi on a brand new CoreXY. All is working fine, very quiet and no problems! 🙂

          Very minor issue, the web page always reports that the build has 500 layers, no matter how many there really are. (This model actually has 236 layers.)

          EDIT: The root cause is likely that the model height is incorrect

          Always comes through as 100mm.

          1 Reply Last reply Reply Quote 0
          • undefined
            deckingman
            last edited by 12 Sept 2016, 18:55

            I seem to remember reading something somewhere about the firmware finding the object height by reading the last G1 Z command in the gcode file. If you have a G1 Z at the end of your print to lift the head, that can screw it up. You can still lift the head but use G0 instead of G1 (does the same thing I think).

            Ian
            https://somei3deas.wordpress.com/
            https://www.youtube.com/@deckingman

            1 Reply Last reply Reply Quote 0
            • undefined
              lignumaqua
              last edited by 12 Sept 2016, 19:16

              @deckingman:

              I seem to remember reading something somewhere about the firmware finding the object height by reading the last G1 Z command in the gcode file. If you have a G1 Z at the end of your print to lift the head, that can screw it up. You can still lift the head but use G0 instead of G1 (does the same thing I think).

              Aha! Thank you, that is precisely the problem. I have a G1 Z100 in my ending script. I'll change that to G0 Z100.

              1 Reply Last reply Reply Quote 0
              • undefined
                dc42 administrators
                last edited by 13 Sept 2016, 06:00

                A workaround for that is to put a comment starting with upper case E on the end of that G1 line. I'm not sure that using G0 instead of G1 will make any difference.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                1 Reply Last reply Reply Quote 0
                • undefined
                  deckingman
                  last edited by 13 Sept 2016, 07:10

                  Found where I'd read that about G0 - it was here https://miscsolutions.wordpress.com/2014/06/11/five-tips-for-using-dc42-firmware-on-the-reprappro-ormerod/. No offence intended but if G0 doesn't work, maybe you should amend you blog David.

                  Ian
                  https://somei3deas.wordpress.com/
                  https://www.youtube.com/@deckingman

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    lignumaqua
                    last edited by 14 Sept 2016, 02:28

                    Using G0 fixed the problem. Many thanks for the help.

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      Toddimus
                      last edited by 16 Sept 2016, 23:14

                      @dc42:

                      Those of you who are having Z probe trouble going from 1.15b to 1.15c, what probe type do you have set in M558, and how do you have the probe connected?

                      Any more thoughts on this issue?
                      I know you are quite busy, and hopefully have a life outside 3D printing, so I understand any delay. 🙂

                      1 Reply Last reply Reply Quote 0
                      • undefined
                        dc42 administrators
                        last edited by 17 Sept 2016, 04:28

                        Sorry I won't be able to look at this for several more days. I've already looked at the code changes in 1.15c and I didn't find anything to explain it.

                        If you wish, you could try connecting the fsr board to the Z probe connector instead of E0 and use probe type 5.

                        Duet WiFi hardware designer and firmware engineer
                        Please do not ask me for Duet support via PM or email, use the forum
                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          guywinslow
                          last edited by 19 Sept 2016, 04:01

                          Just code my board in the mail 1 week ago. had to print a Case. Got wired and mounted today.

                          Improvements:
                          Stepper control vast improvement.
                          Temperature control wall much stabler, terns off when the gcode changes the temperature wall its printing.

                          Working on reproducing it right now

                          1 Reply Last reply Reply Quote 0
                          • undefined
                            guywinslow
                            last edited by 19 Sept 2016, 04:09

                            OK, Cant reproduse

                            1 Reply Last reply Reply Quote 0
                            • undefined
                              mhackney
                              last edited by 19 Sept 2016, 15:30

                              David or anyone, is the comment about M301 in config.g relevant if upgrading from 1.15-beta3 release?

                              My 3D Printing blog: http://www.sublimelayers.com
                              Coming this summer: "3D Printing Strategies - the art of perfecting your designs and prints"

                              1 Reply Last reply Reply Quote 0
                              • undefined
                                dc42 administrators
                                last edited by 19 Sept 2016, 15:45

                                Yes it is.

                                Duet WiFi hardware designer and firmware engineer
                                Please do not ask me for Duet support via PM or email, use the forum
                                http://www.escher3d.com, https://miscsolutions.wordpress.com

                                1 Reply Last reply Reply Quote 0
                                • undefined
                                  mhackney
                                  last edited by 19 Sept 2016, 15:51

                                  Thanks David. I'll upgrade now and know what to watch for.

                                  My 3D Printing blog: http://www.sublimelayers.com
                                  Coming this summer: "3D Printing Strategies - the art of perfecting your designs and prints"

                                  1 Reply Last reply Reply Quote 0
                                  • undefined
                                    mhackney
                                    last edited by 19 Sept 2016, 16:02

                                    Firmware update to 1.15c went smoothly but DWC does not seem to be updating even after a power reset. Unless HTML: 1.11b-dc42, JS: 1.11b-dc42 is correct for the 1.15c tagged binary on git?

                                    My 3D Printing blog: http://www.sublimelayers.com
                                    Coming this summer: "3D Printing Strategies - the art of perfecting your designs and prints"

                                    1 Reply Last reply Reply Quote 0
                                    • undefined
                                      dc42 administrators
                                      last edited by 19 Sept 2016, 16:35

                                      Did you upload the DuetWebControl.bin file through the Settings page?

                                      Duet WiFi hardware designer and firmware engineer
                                      Please do not ask me for Duet support via PM or email, use the forum
                                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                                      1 Reply Last reply Reply Quote 0
                                      • undefined
                                        mhackney
                                        last edited by 19 Sept 2016, 17:55

                                        David, yes I did and it appeared to upload correctly with no returned errors.

                                        My 3D Printing blog: http://www.sublimelayers.com
                                        Coming this summer: "3D Printing Strategies - the art of perfecting your designs and prints"

                                        1 Reply Last reply Reply Quote 0
                                        • undefined
                                          dc42 administrators
                                          last edited by 19 Sept 2016, 18:32

                                          As you are running DWC 1.11 at present, you need to run M997 S2 after uploading it. The web interface will disconnect and you will need to wait about 3 minutes before you can reconnect it. If you have a PanelDue running firmware 1.14 or later connected, you can see the firmware update progress on it.

                                          Duet WiFi hardware designer and firmware engineer
                                          Please do not ask me for Duet support via PM or email, use the forum
                                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                                          1 Reply Last reply Reply Quote 0
                                          18 out of 79
                                          • First post
                                            18/79
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA