Bed compensation test?
-
So, I measured the trigger height in 5 different points:
Center: 1.540
X35 Y25 : 1.523
X290 Y25 : 1.565
X290 Y290 : 1.543
X35 Y290 : 1.528My bed surface is GKF, glass fiber or garolite I think it's known by
-
Garolite is quite shiny and reflective. Perhaps the IR probe isn't performing well with it. Try covering the bed surface with a piece of plain paper to eliminate the shininess and see how the probe results compare.
-
@phaedrux I have a Easy Peelzy for the Tornado, I will try that. The surface is BuildTak-like and should be ok, I guess