• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Duet2 WiFi : No WiFi without SD Card

Scheduled Pinned Locked Moved
Duet Hardware and wiring
6
45
3.3k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Phaedrux Moderator
    last edited by Phaedrux 16 Apr 2019, 16:52

    No, there's nothing specific to the PanelDue that does in the sys folder. The only communication between the two is serial data.

    When the paneldue is powered up, and you go to the setup page, what is the version listed at the top?

    Can you post a photo of the paneldue so we can verify that you're using the right bin file to update it?

    It seems odd that you'd get two displays that aren't showing the right colors, but I suppose anything is possible. That would be bad luck though.

    Z-Bot CoreXY Build | Thingiverse Profile

    undefined 1 Reply Last reply 16 Apr 2019, 18:07 Reply Quote 0
    • undefined
      elmoret
      last edited by 16 Apr 2019, 17:57

      @OP I strongly suspect (based on the edge of the photos you posted that appear to show a 40 pin connector) that you are attempting to flash integrated firmware ("PanelDue-5.0i-7.0i.bin") to a non-integrated PanelDue setup. As David said, The correct firmware for a nonintegrated setup that is https://github.com/dc42/PanelDueFirmware/releases/download/1.22.1/PanelDue-v3-7.0.bin.

      undefined 1 Reply Last reply 16 Apr 2019, 18:10 Reply Quote 0
      • undefined
        DennisHall @Phaedrux
        last edited by DennisHall 16 Apr 2019, 18:07

        @phaedrux
        For the replacement DuetDue 7i I just received, the version is: 1.21.3(13b1).
        For the original DuetDue 7i, the build version is: 1.22.1(28b1) - this was the one I had uploaded the new firmware to (per the previous link that was sent in this post).

        No need to post a photo, the 2 LCDs and driver boards are identical.

        What is the difference between the the "integrated" and and "non-integrated" that I'm reading above?
        Maybe you mean the LCD is part of the Duet2 WiFi (i.e. connected directly to the Duet2 WiFi without cables) when you state "integrated"?

        1 Reply Last reply Reply Quote 0
        • undefined
          DennisHall @elmoret
          last edited by DennisHall 16 Apr 2019, 18:10

          @elmoret What is the difference betwen "integrated" and "non-integrated"?
          I purchased OEM Duet2 WiFi and PanelDue 7i, not a knockoff Chinese junk one or such if that is what non-integrated means. Still, I'll try you version of the bin file now.

          1 Reply Last reply Reply Quote 0
          • undefined
            elmoret
            last edited by elmoret 16 Apr 2019, 18:19

            Please post a clear, well lit photo of your PanelDue. Spool3D does not appear to sell the PanelDue7i.

            undefined 1 Reply Last reply 16 Apr 2019, 19:03 Reply Quote 0
            • undefined
              DennisHall @elmoret
              last edited by 16 Apr 2019, 19:03

              @elmoret
              It looks like they ran out of the 7i model.

              To soothe your doubts...
              My original order: alt text
              The replacements parts that I just recieved: alt text
              The 2 PanelDue 7i's I'm trying to get better than 8-bit colors out of (the bottom one is lower on my desk - so looks smaller) and is the one I just received: alt text

              Feel free to post any further doubts you may have.

              1 Reply Last reply Reply Quote 0
              • undefined
                elmoret
                last edited by elmoret 16 Apr 2019, 19:08

                None of those photos or screenshots show a PanelDue7i.

                My suspicions were correct, you have a non-integrated setup (a PanelDue and a 7" LCD, two separate boards) and as such, have been loading the wrong firmware.

                I do not believe the boards are at fault here, unfortunate for Spool3D as they likely incurred costs when the boards were not defective.

                undefined 1 Reply Last reply 16 Apr 2019, 19:22 Reply Quote 0
                • undefined
                  Phaedrux Moderator
                  last edited by 16 Apr 2019, 19:17

                  Integrated means that the LCD and the PCB are integrated together. The non-integrated version has the PCB connect to the LCD via a 40 pin connector, that's all.

                  So try flashing this firmware: https://github.com/dc42/PanelDueFirmware/releases/download/1.23.2/PanelDue-v3-7.0-nologo.bin

                  Z-Bot CoreXY Build | Thingiverse Profile

                  undefined 2 Replies Last reply 16 Apr 2019, 19:23 Reply Quote 0
                  • undefined
                    DennisHall @elmoret
                    last edited by 16 Apr 2019, 19:22

                    @elmoret The boards have come out of box with the 8-bit colors. Notice I did not upload a bin for the new one?

                    I also now suspect the boards are not at fault, but the Duet2 WiFi may be.
                    I only even got a replacement because I was told previously in this thread, the LCD may be defective.
                    If you review this thread you will see for yourself.

                    undefined 1 Reply Last reply 16 Apr 2019, 20:11 Reply Quote 0
                    • undefined
                      DennisHall @Phaedrux
                      last edited by 16 Apr 2019, 19:23

                      @phaedrux Thanks. That is helpful to know why some people call the 7i and other do not. Now I know the terminology that you typically can't find via Google about these boards.

                      So yes, my setup is a PanelDue 7.

                      1 Reply Last reply Reply Quote 0
                      • undefined
                        Phaedrux Moderator
                        last edited by 16 Apr 2019, 19:27

                        There's a bit more information on the PanelDue here
                        https://duet3d.dozuki.com/Wiki/PanelDue
                        and here
                        https://duet3d.dozuki.com/Wiki/Connecting_an_LCD_control_panel

                        If you flash the bin I linked above and it's still having color issues we can work from there.

                        Z-Bot CoreXY Build | Thingiverse Profile

                        1 Reply Last reply Reply Quote 1
                        • undefined
                          dc42 administrators
                          last edited by 16 Apr 2019, 20:08

                          The standard file for that display/board combo is https://github.com/dc42/PanelDueFirmware/releases/download/1.23.2/PanelDue-v3-7.0.bin. But you can also use the version without splash screen that @Phaedrux linked to.

                          Duet WiFi hardware designer and firmware engineer
                          Please do not ask me for Duet support via PM or email, use the forum
                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                          1 Reply Last reply Reply Quote 0
                          • undefined
                            elmoret @DennisHall
                            last edited by elmoret 16 Apr 2019, 20:11

                            @dennishall said in Duet2 WiFi : No WiFi without SD Card:

                            @elmoret
                            I only even got a replacement because I was told previously in this thread, the LCD may be defective.
                            If you review this thread you will see for yourself.

                            People only arrived at that conclusion because you repeatedly stated that you had a PanelDue 7i.

                            As for how they came out of the box, sounds like someone in the supply chain (perhaps Spool3D) is flashing incorrect firmware. But that's fixable without replacement hardware, of course.

                            Why do you suspect the Duet 2 Wifi is defective?

                            undefined 1 Reply Last reply 16 Apr 2019, 20:32 Reply Quote 0
                            • undefined
                              dc42 administrators
                              last edited by 16 Apr 2019, 20:25

                              My guess is that the PanelDue controller board has the 5" firmware on it, which is how they are programmed during manufacture. Running 5" firmware on a 7" panel gives incorrect colours.

                              Duet WiFi hardware designer and firmware engineer
                              Please do not ask me for Duet support via PM or email, use the forum
                              http://www.escher3d.com, https://miscsolutions.wordpress.com

                              undefined 1 Reply Last reply 16 Apr 2019, 20:34 Reply Quote 0
                              • undefined
                                DennisHall @elmoret
                                last edited by 16 Apr 2019, 20:32

                                @elmoret Thanks fo rthe model type clarification.
                                All good now. That no-logo bin file took care of it.
                                I only suspected the Duet2 WiFi starting today when the replacement LCD had the same result out-of-box.

                                I just got off the phone with Darek at Spool3D. They don't flash the hardware, seems Duet shipped with V1.21.1. Darek also says they have 5 more 7 inch LCD's still in stock and will update their site stock.

                                Anyhow, all good now.

                                Sorry if I got testy with anyone, that's me getting a bit stressed. Terminologies are not always consistent between Chineze clones and "real" hardware 😉

                                I love the Dark 2 colors scheme on the LCD with the 1.22.1 firmware build.

                                1 Reply Last reply Reply Quote 0
                                • undefined
                                  DennisHall @dc42
                                  last edited by 16 Apr 2019, 20:34

                                  @dc42 Sorry if my photos in this thread did not show the controller board separate from the LCD.
                                  The issue was my lack of knowledge of the model type between my 7 and a 7i.

                                  The no-logo bin file took care of business and Spool3D also now knows they are receiving their PanelDue models with the 1.21.1 firmware.

                                  1 Reply Last reply Reply Quote 0
                                  • undefined
                                    DennisHall @Phaedrux
                                    last edited by 16 Apr 2019, 20:36

                                    @phaedrux Thanks man! That was the right bin file for (what I now know is a PanelDue 7)
                                    Your summary made it obvious.

                                    Really appreciated.

                                    1 Reply Last reply Reply Quote 0
                                    38 out of 45
                                    • First post
                                      38/45
                                      Last post
                                    Unless otherwise noted, all forum content is licensed under CC-BY-SA