New board, can't connect (failed to retrieve network list)

Dkos

Hello!

I am just configuring my brand new Duet2 wifi board but i am facing a problem setting up the wifi connection to my home network.

I have it setup for an automatic DHCP (default) I have the wifi module started (reporting "Wifi module is idle"). After looking a bit on the forum i tried the following:

Updating firmware to (and DuetWifiServer as well):

FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-06-13b2

Tried to connect manually with M587 S"" P"":

M587: Failed to add SSID to remembered list
Error retrieving WiFi status message: bad reply format version
[ERROR] Error retrieving WiFi status message: bad reply format version

M587 returns:

M587: Failed to retrieve network list

Am i doing something wrong?

Thanks in advance!

Phaedrux

Do you know what version of Wifi server you're running? Perhaps it's mismatched to the main firmware. For 2.03 it should be 1.23.

Dkos

Seems to be fixed. Not sure which specific step i did made it work, after a bunch of restarts i re-create the config from the configurator tool, then i edited the SetNetwork macro, commented the M552 S1 from the config and run the macro instead..

Time to explore the rest!

Dkos

@phaedrux Thanks for the quick reply! i used the Wifi server from the same release as the firmware so i guess it was ok. After a few tries it seems to work now