Novel/Unusual/Large printer videos wanted

dc42

I didn't know we had anyone using a polar printer seriously! The Polar kinematics support is probably the least debugged of any. I wrote it without having a printer to test it on. Let me know (after TCT) if you find any issues with it.

PS - it looks like you can do some very tall prints!

CNCModeller

@dc42 said in Novel/Unusual/Large printer videos wanted:

I didn't know we had anyone using a polar printer seriously!

If all goes well with this prototype I'm hoping to end up with a farm of these and so far it's been straightforward all things considered.

Let me know (after TCT) if you find any issues with it.

Only thing so far is it doesn't seem to be limiting rotational speed near the centre of the bed but that might be me setting it up wrong. Will be in touch once I've got a little more experience.

PS - it looks like you can do some very tall prints!

Hopefully so, the first cheap bed bearing failed at about 1500 revolutions so the tallest height I've achieved in testing is only 300mm tall. My laser jig tool suggests that she should be good to print to about 1150mm but only a successful test print will confirm it.

I'll be in touch after TCT.

All the best
Barry M

mrehorstdmd

Some video of The Spice Must Flow sand table:

https://vimeo.com/361952669

https://vimeo.com/361953455

https://vimeo.com/361955435

Danal

Is a 1.5 meter tall, 600mm dia bed, delta worthy? I can get some pics. And I won't have hurt feelings if you already have enough large deltas, there are some really cool printers up above in this thread.

droftarts

@Danal Thanks for the offer, I finished off the video for TCT a couple of days ago, and hopefully it's been running on the stand today, and for the next couple of days (I'll see when I go on Thursday). We did have quite a few delta printer videos already! I'll ask @T3P3Tony if we can post it on youtube or somewhere for people to see. Might yet need more videos if we decide to jazz up the website!

Ian

Vinculum

Sorry I just saw this post. We are running 4 completely machines with a 900x1200x1500 build volume. Maybe next time.

DocTrucker

@mrehorstdmd said in Novel/Unusual/Large printer videos wanted:

...The Spice Must Flow...

Looking forward to next year's film? Lynch's effort was entertaining but not a patch on the books and the voice module things were a terrible idea!