Saving levelling map with G29 S3 does not work
-
If I try to save the current levelling map to a specific file name with:
G29 S3 P"mesh70.csv"
I get an error returned and no file is created. The error message is:
Error: G29: bad or missing parameter
I'm using firmware 2.03 on a Duet2 WiFi.
Am I missing something or is this a bug?
The reason I want to do this is that the way my bed warps changes with the bed temperature, so I wanted to create two levelling maps, one at 50°C and another at 70°C and load them as appropriate with filament specific G code.
-
You need to update your firmware to 2.04
From GCode manual.
S3 Save height map (supported in RepRapFirmware 2.04 and later)https://duet3d.dozuki.com/Wiki/Gcode#Section_G29_Mesh_bed_probe
HTH Paul.
-
That was right in front of me when I was reading the documentation as well.Thanks.
-
Pleasure.
