M291 jog controls not working when called from gcode

psychotik2k3

hi,
i flashed to latest rrf2.05.1 as i read about M291 fixes since the version i had but no luck:
if i put a
M291 P"using current X and Y coordinates as X0 and Y0 for G55 workspace" R"XY origins" S3 X1 Y1 Z1

then when i click on the jog button on the web interface nothing moves.

i thought i could use this to eventually tune the values before continuing the job.

thanks

Danal

@psychotik2k3 said in M291 jog controls not working when called from gcode:

M291 P"using current X and Y coordinates as X0 and Y0 for G55 workspace" R"XY origins" S3 X1 Y1 Z1

Works for me, on 2.04 and 2.05.1

chas2706

Does not work for me on RRF3.01_RC1 with duet3 board with SBC and bed levelling with independent Z motors (G32) no longer reports the deviations!