Editing Large gcode File Connection Drop

dc42

Please try firmware 3.01RC3. There has been a fix to networking on the Maestro since 3.0, but I don't have the details to hand so I don't know whether it is relevant or not.

CCS86

This post is deleted!

CCS86

@dc42 said in Editing Large gcode File Connection Drop:

Please try firmware 3.01RC3. There has been a fix to networking on the Maestro since 3.0, but I don't have the details to hand so I don't know whether it is relevant or not.

I just installed RC4 (assuming it has the same network fix as RC3), but the issue remains.

The instant that the file is displayed, this error pops up:

When it reconnects, I just get booted to the main screen.

Let me know if I can gather a detailed log that would help you.

CCS86

@dc42

Honestly, since upgrading from 3.0 to RC4, the network connectivity (outside this specific issue) seems worse.

I frequently get dropouts on the web control display.

CCS86

@dc42

I just tested with RC6 and the issue persists.

CCS86

@dc42

RC11 and DWC 2.1.6

Same issue. Any ideas? Is this more likely a DWC or RRF issue?

CCS86

Still happening in "stable" RRF 3.1 / DWC 3.1

@dc42 Thoughts?

dc42

I was unable to reproduce this, having successfully edited a 9.2Mbyte file multiple times using FireFox under Windows. However, I have just tried again, and I have found that if I use Chrome instead of Firefox, I can reproduce the problem.

It's not specific to the Maestro because I have the same issue if I try to edit a 8.1Mbyte file on a Duet WiFi: it works using FireFox but not using Chrome.

We'll look into it.

CCS86

@dc42 said in Editing Large gcode File Connection Drop:

I was unable to reproduce this, having successfully edited a 9.2Mbyte file multiple times using FireFox under Windows. However, I have just tried again, and I have found that if I use Chrome instead of Firefox, I can reproduce the problem.

It's not specific to the Maestro because I have the same issue if I try to edit a 8.1Mbyte file on a Duet WiFi: it works using FireFox but not using Chrome.

We'll look into it.

Thank you!

I can confirm, I am also using Chrome

dc42

We've fixed this in release 3.1.1. Thanks for reporting it.

CCS86

@dc42 said in Editing Large gcode File Connection Drop:

We've fixed this in release 3.1.1. Thanks for reporting it.

RRF 3.1.1 / DWC 3.1.1 installed and tested in Chrome.

A 13.9 MB file successfully edits now! Excellent!

However, my next size up is 15.8 MB, and that file and anything larger now have the "edit" menu option greyed out.

chrishamm

@CCS86 This limit has been defined because at a certain size the HTML textarea becomes too slow to work with. We might be able to remove that once the new G-code editor from the pending DWC PR has been merged.