Quick question about boot order with an RPi and Duet 3
-
@bearer said in Quick question about boot order with an RPi and Duet 3:
@deckingman said in Quick question about boot order with an RPi and Duet 3:
@bearer said in Quick question about boot order with an RPi and Duet 3:
Did you comment on where the fan(s) are connected? Curious if this is different for the toolboard vs the expansion and main board.
I didn't - but they are (currently) just connected to io6 on one of the expansion boards (I think it's 6 - the first 2 pin header).
Thanks, if you have a toolboard I'd love to see if its different. (both expansion and main board have the pull downs, while the tool board does not). Just a curiosity on my end, so don't put much effort in it on my behalf.
Sorry - don't have any tool boards. Also see my edited post above (OUT6 not io6).
-
fair enough! which out it is makes little difference, they're driven the same way all of them.
maybe some of the other users who do have a toolboard can chime in if the behavior is the same as it would be interesting to factor in when people ask if they should get this or that.
-
@bearer The only reason I used OUT6 is that these are simple 2 wire fans and the lower numbered OUT headers are 4 pin with additional gnd and tacho. So I wanted to keep these headers in reserve in case I ever need to add a tacho fan.
-
I meant that which output is used doesn't matter with respect to the behavior when the board is reset. There are indeed other considerations to make.
-
Have not tried this myself, but there are examples of people getting the Pi to boot in ~5 seconds with some modifications.
http://himeshp.blogspot.com/2018/08/fast-boot-with-raspberry-pi.html
Note that was with Pi3 a couple years ago now. Not sure how relevant it would be to Pi4.
The pi forums have many threads on trying to optimize boot time. https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=258091
Normal SD card boot times are all pretty close to 25 seconds on the pi4 from what I've seen. Moving to an SSD may improve that a bit but I don't think that's a natively supported option yet.
https://www.youtube.com/watch?v=gp6XW-fGVjo
If sticking with an SD card, try and choose one with high write speeds and high IOPs. A2 U3 class.
-
I just looked into the boot process again and I've found a way to prioritise DSF. This way, DCS will start within 10 seconds when the Pi is powered on.
-
On the subject or wiring the fans as being always on, looking at the wiring diagram https://d17kynu4zpq5hy.cloudfront.net/igi/duet3d/6mYpDS1EmhXHobw4.huge it looks like I could simply connect the fans to OUT3 (or 4 or 5) GND and V_OUTLC1.
-
@deckingman said in Quick question about boot order with an RPi and Duet 3:
On the subject or wiring the fans as being always on, looking at the wiring diagram https://d17kynu4zpq5hy.cloudfront.net/igi/duet3d/6mYpDS1EmhXHobw4.huge it looks like I could simply connect the fans to OUT3 (or 4 or 5) GND and V_OUTLC1.
I may have missed this before but why not use the always-on fan header right above out_0?
-
@deckingman said in Quick question about boot order with an RPi and Duet 3:
V_OUTLC1.
if you remove the jumper that pin has no voltage, use 12v on same header instead.
-
@gtj0 said in Quick question about boot order with an RPi and Duet 3:
I may have missed this before but why not use the always-on fan header right above out_0?
methinks he has 24v Vin and 12v fans.
-
@bearer said in Quick question about boot order with an RPi and Duet 3:
@deckingman said in Quick question about boot order with an RPi and Duet 3:
V_OUTLC1.
if you remove the jumper that pin has no voltage, use 12v on same header instead.
???? There is no 12V on that header - but I'm not going to remove the jumper - I'll set it to 12V.
-
@bearer said in Quick question about boot order with an RPi and Duet 3:
@gtj0 said in Quick question about boot order with an RPi and Duet 3:
I may have missed this before but why not use the always-on fan header right above out_0?
methinks he has 24v Vin and 12v fans.
Correct.
-
@deckingman said in Quick question about boot order with an RPi and Duet 3:
???? There is no 12V on that header - but I'm not going to remove the jumper - I'll set it to 12V.
never mind, i thought you meant to use the pin on the voltage selection header, but that doesn't make sense.
you're good to go as planned
-
@bearer said in Quick question about boot order with an RPi and Duet 3:
@deckingman said in Quick question about boot order with an RPi and Duet 3:
???? There is no 12V on that header - but I'm not going to remove the jumper - I'll set it to 12V.
never mind, i thought you meant to use the pin on the voltage selection header, but that doesn't make sense.
you're good to go as planned
You had me worried there - at my age, senile dementia is just around the corner so....
-
@deckingman said in Quick question about boot order with an RPi and Duet 3:
You had me worried there - at my age, senile dementia is just around the corner so....
seems i'm the one ought be worried
