Duet wifi 2 reset when trying to home printer w smart effector

[chris]

@Danal , just flashes green twice then stops.

[chris]

do u think worth just resetting duet 2 board

[dc42]

Does it home the printer and then reset; or reset without moving the carriages at all?

Please post your homedelta.g file.

[chris]

@Phaedrux G28

[chris]

@dc42 nope tries to move carriages home then trips

[dc42]

@chris said in Duet wifi 2 reset when trying to home printer w smart effector:

@dc42 nope tries to move carriages home then trips

Are sure you have the endstop switches connected to the right pins on the connectors on the Duet?

[chris]

@dc42, here is homedelta.g

; homedelta.g
; called to home all towers on a delta printer
;
; generated by RepRapFirmware Configuration Tool on Sat Oct 27 2018 13:30:24 GMT+0100 (British Summer Time)
G91 ; relative positioning
;*** Slow homing has been configured. Change F480 to F4800 below when your configuration is working
G1 S1 X625 Y625 Z625 F4800 ; move all towers to the high end stopping at the endstops (first pass)
G1 X-5 Y-5 Z-5 F4800 S2 ; go down a few mm
G1 S1 X10 Y10 Z10 F480 ; move all towers up once more (second pass)
G1 Z-5 F4800 ; move down a few mm so that the nozzle can be centred
G90 ; absolute positioning
G1 X0 Y0 F4800 ; move X+Y to the centre

[chris]

@dc42 yes, x stop, y stop and z stop. on duet web says endstop 0 , 1 , 2 not triggered and endstop 3 is triggered.

[chris]

Even disconnecting everything a part from endstops and trying each moter cause board to reset

[chris]

re uploading replicator configuration seemed to have solved it but not sure why in first place