Audio on Duet3/SBC
Xavier last edited by
So I have my duet3 up and running with an sbc (rpi 4) and I was wondering, is it possible to connect a speaker to the audio jack on the raspberry pi and use it to reproduce audio files on command? The use case would be to play a specific notification when there is a crash, when there is a print started, ended, filament out sensed etc.
A Former User last edited by A Former User
i'm sure there are lots of other options, but https://www.raspberrypi.org/documentation/usage/audio/
(and https://forum.duet3d.com/topic/13194/dsf-extension-exec-on-mcode-was-shutdown-sbc of that wasn't obvious)