can you suggest kinematics for multiple z axis?
jhonf441 last edited by jhonf441
Hi, I have a XY core printer with 600mm x 600mm printing area, currently the bed goes up and down, but since the bed is heavy I want to use a real self-leveling and I wanted to know what kinematic couplings they recommend or what they think of an XY core that up and down with the fixed bed.
I am going to use independent motors with linear guide
thanks in advance.
I came in thinking this was tips on how to film your printer... disappointment aside...
if the bed is heavy you can use a finer lead screw thread to reduce the torque needed and increase the holding ability.
If you really want to raise the XY gantry instead, take a look at the Voron2 printer.
jhonf441 last edited by