Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Problem with Duex Endstop Pins (external Gcode)

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    duex5 endstop external accessories
    1
    2
    255
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • MauriceMundefined
      MauriceM
      last edited by MauriceM

      Hello, i have a Problem with my duex Endstop pins. I want to use them as external Gcode trigger. I allready have some on the Duet and they are working fine.

      When i configure a Duex5 Endstop Pin to an Trigger for an external switch the trigger will noch be triggered when i push the switch. No matter if i invert the Pin. BUT if a cable is connected, and i pull the cable if the pin, also when it is noch attached to GROUND, the pin gets triggered....

      the problem also shows up in the newest RRF

      I dont know what causes this Problem, also the endstop pin LEDs never light up, do i have to configure them bevorhand... Or do i have a broken DUEX or DUET.

      And im currently using RRF3.0

      1 Reply Last reply Reply Quote 0
      • MauriceMundefined
        MauriceM
        last edited by

        I solved the Problem 😄

        You have to PullUp the Pin than it will work.

        1 Reply Last reply Reply Quote 1
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA