Teaching Tech RepRap firmware on SKR video
-
Teaching Tech came with video explaining how to install RRF on a low cost SKR board.
https://www.youtube.com/watch?v=Mw-Gg3y__Go
An off the shelf low cost Ender 3 upgrade kit to RRF could give a major boost to the RRF user base.
-
saw it just now, was aaaaalmost tempting to get one and try, but bad timing with e3d also just putting the hemera up for sale again which had a negative impact on toy budget:P:)
particularly interesting to see the LPC crowd using DSF.
-
Works very well with DSF. We did have some issues with the 1.4 turbo getting transfer pin errors but that's been fixed now.
I have it running very well on my test printer.
