Teaching Tech RepRap firmware on SKR video
zapta last edited by
Teaching Tech came with video explaining how to install RRF on a low cost SKR board.
An off the shelf low cost Ender 3 upgrade kit to RRF could give a major boost to the RRF user base.
bearer last edited by
saw it just now, was aaaaalmost tempting to get one and try, but bad timing with e3d also just putting the hemera up for sale again which had a negative impact on toy budget:P:)
particularly interesting to see the LPC crowd using DSF.
jay_s_uk last edited by
Works very well with DSF. We did have some issues with the 1.4 turbo getting transfer pin errors but that's been fixed now.
I have it running very well on my test printer.