Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 3 v1.0 Fault on SD slot

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    5
    24
    620
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A Former User?
      A Former User
      last edited by

      i didn't read the whole thread i'll admitt, but if you want to verify the individual parts that make up the connection between the pi and the duet this old-ish thread has a ton of information on where to go digging https://forum.duet3d.com/topic/15551/duet3-pi-dcs-is-unavailable-after-wiring-24v/119?_=1597267914698

      (and if not, disregard:)

      Carloundefined 1 Reply Last reply Reply Quote 1
      • Carloundefined
        Carlo @A Former User
        last edited by

        @bearer

        Thanks bearer I was following the thread at the time I did check continuity and chris did manage to recreate an issue I was having so expect there would be a fix at some point
        though at the time it was still freezing my issues which are many but with the duet even weirder and may not have been software or communication between the 2 as it ran as expected until a file was loaded everything else perfect probe, mesh G1's all extruding, heaters maybe a buffer/memory conflict/issue ?

        droftartsundefined 1 Reply Last reply Reply Quote 0
        • droftartsundefined
          droftarts administrators @Carlo
          last edited by

          @Carlo These two pins of your SD card socket do not look well soldered:
          Screenshot 2020-08-13 at 14.50.20.png
          Can you take a picture of the socket from an angle across the board, as shown here https://duet3d.dozuki.com/Wiki/SD_Card#Section_SD_Card_Socket

          Ian

          Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

          Carloundefined 1 Reply Last reply Reply Quote 0
          • Carloundefined
            Carlo @droftarts
            last edited by Carlo

            @droftarts

            Hi Ian,

            Sorry the board went in the mail run today wanted to keep it a while to test 3.2 beta 1
            plus it is out of stock...but you get 7 days for return once they issue a returns # and I may have no access to office or workshop due to another possible 2 week lock down in my area

            all the pins looked to be well attached and no oxidation all the contacts look ok..bit hard to see inside the slot

            Image I took yesterday from a different angle.

            IMG_1618.jpg

            Dunno if it is of help.

            Cheers
            C

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA