Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Restart extrusion amount after resuming the pause (M226)

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    3
    4
    279
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • omniundefined
      omni
      last edited by

      Hi guys,

      I often use the M226 command in the GCODE to pause the print after a certain layer and insert metallic parts such as nuts and magnets into a print and then resume the print via the PanelDue resume button.

      This works great except for one thing - every time I resume the print head comes back into position and then extrudes a pile of plastic on my print (I guess this is the restart filament amount) and then resumes the print normally. This is a problem since with my hotend (Mosquito) I do not need the restart amount and it just messes up the print potentially making the print head hit that big chunk thereby ruining the print.

      Is there a command or setting where I can turn off this "resume filament extrusion amount" or whatever it is called.

      Thanks a lot in advance.

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        Take a look inside your resume.g file, that's where the re-prime command will be.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • omniundefined
          omni
          last edited by

          Great, thanks!
          I completely forgot there is a resume.g. 🙂

          peter247undefined 1 Reply Last reply Reply Quote 0
          • peter247undefined
            peter247 @omni
            last edited by peter247

            @omni

            It is the first time I fitted a filament out to my duet wifi and found the same problem , pause retracts 10mm of filament and resume put it back , but if you change filament and push filament until you see the new filament come out you get a 10mm big blob on resume.
            So I now retract 10mm before I resume .

            Ender 5 plus linear rail and hemera powered by duet 2 wifi , CR10s pro v1 with bltouch mostly stock , BLV mgn Cube slowly being built powered by duet 3 mini 5+

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA