pid tuning Bed with external 110vac

  • M307 H0 A138.4 C562.2 D0.8 S1.00 V24.2 B0

    the above is after a PID tune, will there be any issue with the above (V24.2) and the actual being 110v and external ?

  • No, doesn't matter and in fact, it's best to take that out.
    This is because that value allows the firmware to adjust the power based on the input voltage.
    As your bed is powered by another source, that voltage doesn't actually factor.
    So just set it to 0

Log in to reply