Bed Heating SSR
-
Can you make a video of your screen showing what you're trying to do?
-
yes but the link is for duet3 and i have a duet2
-
Yes of course you are correct. Sorry about that.
I think you are missing some files from the 2.05.1 release which makes me think you might be uploading the wrong zip file.
Please download these zip files fresh and make sure you don't change the names.
https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/Duet2Firmware-2.05.1.zip
https://github.com/Duet3D/RepRapFirmware/releases/download/3.0/Duet2and3Firmware-3.0.zip
https://github.com/Duet3D/RepRapFirmware/releases/download/3.1.1/Duet2and3Firmware-3.1.1.zip
Start with 2.05.1 zip file and it should update everything for RRF2.
Then do 3.0 and then 3.1.1.
-
2.05.1 OK
3.0 OK
3.1.1 is really too long is it normal ? -
Its work but i have one again problem im so sorry Error: Heater 0 fault: temperature rising much more slowly than the expected 1.7°C/sec
-
do you know for why is like that
-
PID problem ?
-
Yes, PID tune and save the results.
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+4:+Calibration/40#s161
-
merci merci beaucoup j'ai fini mon projet grâce a vous merci encore
-
C'est mon plaisir.
-
J’ai encore plein de question mais je dérangerai un autre jour encore merci
