Bed Heating SSR

chris974M

M997 S0:1
Error: M997: In-application programming binary "iap4e.bin" not found

Phaedrux

Upload the full zip file as is. Do NOT extract it.

chris974M

oui j'ai telecharger le fichier ZIP

chris974M

j'ai toujours se message d'erreur M997 S0:1
Error: M997: In-application programming binary "iap4e.bin" not found

Phaedrux

When uploading the zip file to the /sys folder it should prompt to install the firmware. You do not need to send M997 at all.

However, because it is complaining about missing IAP files you can try this method which should also work.

chris974M

ok i try thanks

chris974M

not work

Phaedrux

Can you make a video of your screen showing what you're trying to do?

chris974M

yes but the link is for duet3 and i have a duet2

Phaedrux

Yes of course you are correct. Sorry about that.

I think you are missing some files from the 2.05.1 release which makes me think you might be uploading the wrong zip file.

Please download these zip files fresh and make sure you don't change the names.

Start with 2.05.1 zip file and it should update everything for RRF2.

Then do 3.0 and then 3.1.1.

chris974M

2.05.1 OK
3.0 OK
3.1.1 is really too long is it normal ?

chris974M

Its work but i have one again problem im so sorry Error: Heater 0 fault: temperature rising much more slowly than the expected 1.7°C/sec

chris974M

do you know for why is like that

chris974M

PID problem ?

Phaedrux

Yes, PID tune and save the results.

chris974M

merci merci beaucoup j'ai fini mon projet grâce a vous merci encore

Phaedrux

C'est mon plaisir.

chris974M

J’ai encore plein de question mais je dérangerai un autre jour encore merci