Bed Heating SSR

chris974M · 6 Oct 2020, 22:02

oui j'ai telecharger le fichier ZIP

chris974M · 6 Oct 2020, 22:03

j'ai toujours se message d'erreur M997 S0:1
Error: M997: In-application programming binary "iap4e.bin" not found

Phaedrux · 6 Oct 2020, 22:06

When uploading the zip file to the /sys folder it should prompt to install the firmware. You do not need to send M997 at all.

However, because it is complaining about missing IAP files you can try this method which should also work.

chris974M · 6 Oct 2020, 22:09

ok i try thanks

chris974M · 6 Oct 2020, 22:13

not work

Phaedrux · 6 Oct 2020, 22:14

Can you make a video of your screen showing what you're trying to do?

chris974M · 6 Oct 2020, 22:16

yes but the link is for duet3 and i have a duet2

Phaedrux · 6 Oct 2020, 22:22

Yes of course you are correct. Sorry about that.

I think you are missing some files from the 2.05.1 release which makes me think you might be uploading the wrong zip file.

Please download these zip files fresh and make sure you don't change the names.

Start with 2.05.1 zip file and it should update everything for RRF2.

Then do 3.0 and then 3.1.1.

chris974M · 6 Oct 2020, 22:38

2.05.1 OK
3.0 OK
3.1.1 is really too long is it normal ?

chris974M · 6 Oct 2020, 22:47

Its work but i have one again problem im so sorry Error: Heater 0 fault: temperature rising much more slowly than the expected 1.7°C/sec

chris974M · 6 Oct 2020, 22:48

do you know for why is like that

chris974M · 6 Oct 2020, 22:50

PID problem ?

Phaedrux · 6 Oct 2020, 22:51

Yes, PID tune and save the results.

chris974M · 6 Oct 2020, 22:54

merci merci beaucoup j'ai fini mon projet grâce a vous merci encore

Phaedrux · 6 Oct 2020, 22:58

C'est mon plaisir.

chris974M · 6 Oct 2020, 23:19

J’ai encore plein de question mais je dérangerai un autre jour encore merci