Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Bed Heating SSR

    Scheduled Pinned Locked Moved
    Firmware installation
    2
    32
    1.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Phaedruxundefined
      Phaedrux Moderator
      last edited by

      Upload them one at a time starting with 3.0 and update, reboot, and then upload 3.1.1

      Z-Bot CoreXY Build | Thingiverse Profile

      1 Reply Last reply Reply Quote 0
      • chris974Mundefined
        chris974M
        last edited by

        06/10/2020 à 23:58:37 M115
        FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.05.1 ELECTRONICS: Duet WiFi 1.02 or later + DueX5 FIRMWARE_DATE: 2020-02-09b1

        1 Reply Last reply Reply Quote 0
        • chris974Mundefined
          chris974M
          last edited by

          M997 S0:1
          Error: M997: In-application programming binary "iap4e.bin" not found

          1 Reply Last reply Reply Quote 0
          • Phaedruxundefined
            Phaedrux Moderator
            last edited by

            Upload the full zip file as is. Do NOT extract it.

            Z-Bot CoreXY Build | Thingiverse Profile

            1 Reply Last reply Reply Quote 0
            • chris974Mundefined
              chris974M
              last edited by

              oui j'ai telecharger le fichier ZIP

              1 Reply Last reply Reply Quote 0
              • chris974Mundefined
                chris974M
                last edited by

                j'ai toujours se message d'erreur M997 S0:1
                Error: M997: In-application programming binary "iap4e.bin" not found

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  When uploading the zip file to the /sys folder it should prompt to install the firmware. You do not need to send M997 at all.

                  However, because it is complaining about missing IAP files you can try this method which should also work.

                  https://duet3d.dozuki.com/Wiki/Getting_Started_With_Duet_3#Section_Updating_Duet_3_from_RRF3_0_Beta_12_to_3_0_Final_via_DWC

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • chris974Mundefined
                    chris974M
                    last edited by

                    ok i try thanks

                    1 Reply Last reply Reply Quote 0
                    • chris974Mundefined
                      chris974M
                      last edited by

                      not work

                      1 Reply Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator
                        last edited by

                        Can you make a video of your screen showing what you're trying to do?

                        Z-Bot CoreXY Build | Thingiverse Profile

                        1 Reply Last reply Reply Quote 0
                        • chris974Mundefined
                          chris974M
                          last edited by

                          yes but the link is for duet3 and i have a duet2

                          1 Reply Last reply Reply Quote 0
                          • Phaedruxundefined
                            Phaedrux Moderator
                            last edited by

                            Yes of course you are correct. Sorry about that.

                            I think you are missing some files from the 2.05.1 release which makes me think you might be uploading the wrong zip file.

                            Please download these zip files fresh and make sure you don't change the names.

                            https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/Duet2Firmware-2.05.1.zip

                            https://github.com/Duet3D/RepRapFirmware/releases/download/3.0/Duet2and3Firmware-3.0.zip

                            https://github.com/Duet3D/RepRapFirmware/releases/download/3.1.1/Duet2and3Firmware-3.1.1.zip

                            Start with 2.05.1 zip file and it should update everything for RRF2.

                            Then do 3.0 and then 3.1.1.

                            Z-Bot CoreXY Build | Thingiverse Profile

                            1 Reply Last reply Reply Quote 0
                            • chris974Mundefined
                              chris974M
                              last edited by

                              2.05.1 OK
                              3.0 OK
                              3.1.1 is really too long is it normal ?

                              1 Reply Last reply Reply Quote 0
                              • chris974Mundefined
                                chris974M
                                last edited by

                                Its work but i have one again problem im so sorry Error: Heater 0 fault: temperature rising much more slowly than the expected 1.7°C/sec

                                1 Reply Last reply Reply Quote 0
                                • chris974Mundefined
                                  chris974M
                                  last edited by

                                  do you know for why is like that

                                  1 Reply Last reply Reply Quote 0
                                  • chris974Mundefined
                                    chris974M
                                    last edited by

                                    PID problem ?

                                    1 Reply Last reply Reply Quote 0
                                    • Phaedruxundefined
                                      Phaedrux Moderator
                                      last edited by

                                      Yes, PID tune and save the results.

                                      https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+4:+Calibration/40#s161

                                      Z-Bot CoreXY Build | Thingiverse Profile

                                      1 Reply Last reply Reply Quote 1
                                      • chris974Mundefined
                                        chris974M
                                        last edited by

                                        merci merci beaucoup j'ai fini mon projet grâce a vous merci encore

                                        1 Reply Last reply Reply Quote 0
                                        • Phaedruxundefined
                                          Phaedrux Moderator
                                          last edited by

                                          C'est mon plaisir.

                                          Z-Bot CoreXY Build | Thingiverse Profile

                                          1 Reply Last reply Reply Quote 1
                                          • chris974Mundefined
                                            chris974M
                                            last edited by

                                            J’ai encore plein de question mais je dérangerai un autre jour encore merci

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA