Filament gcodes M701,702,703 crashes board
Furbyhaxx last edited by
Today I discovered that every filament related gcode crashes the board immediatly without additional infos (also not in the log)
M115 FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.2-beta2 ELECTRONICS: Duet WiFi 1.02 or later + DueX5 FIRMWARE_DATE: 2020-10-05b2
This happen if I issue the commands directly or over the DWC functions. Also with an emtpy filament.
Please post the output of M122 after a crash and reset, and your config.g file.
TC last edited by
@Furbyhaxx this problem has been solved