Custom printbed shape
-
Quick Question:
Is there a way to define a custom printbed shape as soft limit for printhead movements?Background:
On my Tevo Little Monster I have a ø34cm print bed which I would like to use to its full extend as far as possible. However the delta towers are quite close to the printbed, thus I would like to have a soft(ware) limit, which prevents the effector to crash into the towers.I would like the effector not to move in the red-striped areas in my sketch.
I know that I can do this in my slicer, but that does not protect me from human error in controlling the printer manually. I would like to achieve the latter one.
-
you can set the
Bnnn Safe printing radius
https://duet3d.dozuki.com/Wiki/Gcode#Section_M665_Set_delta_configurationnormally the edges of the bed are not well heated anyway and your prints have problem with sticking
-
@Veti said in Custom printbed shape:
you can set the
Bnnn Safe printing radius
https://duet3d.dozuki.com/Wiki/Gcode#Section_M665_Set_delta_configurationThanks, I am aware of this. But that is not what I want. I Would like not to virtually limit my printbed this way.
-
would it not be easier to do it in the slicer?
