Not sure what to search for
bam last edited by bam
Can someone please point me in the direction of turning a Chinese idex into a duet powered Chinese idex?
Parts purchased so far:
(1)Duet3hc expansion board
(2) duet tool 1lc
(4) dsum 15pin 3 row female
(1) 7” duet display
Veti last edited by
i dont think there a special instructions for that.
there is a guide for an ender 3 pro
so you have to wire the parts step by step and test each one.
if you are stuck, please ask specific questions an we will try to help you.
@Veti will do, thank you. Parts come in next week.
See https://duet3d.dozuki.com/Wiki/ConfiguringMultipleIndependentXcarriagesCartesian for information on configuring RepRapFirmware for an IDEX printer.
If the toolboards each have a stepper driver, do I need the 3hc expansion board?
Only if you need more stepper drivers. If you have many tool boards maybe the tool distribution board would make more sense.
It has only two extruders, trying to keep boards and wiring to a minimum, more parts=more things to break. @Phaedrux