Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    My duet wifi does not connect to the wifi.

    Scheduled Pinned Locked Moved
    General Discussion
    3
    36
    1.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • GPetropoulosundefined
      GPetropoulos @Phaedrux
      last edited by GPetropoulos

      m122
      === Diagnostics ===
      RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05.1 running on Duet WiFi 1.02
      or later
      Board ID: 08DGM-917NK-F23T0-6JKD4-3S06T-9YANF
      Used output buffers: 1 of 24 (10 max)
      === RTOS ===
      Static ram: 25712
      Dynamic ram: 93220 of which 336 recycled
      Exception stack ram used: 304
      Never used ram: 11500
      Tasks: NETWORK(ready,1884) HEAT(blocked,1232) MAIN(running,3824) IDLE(ready,160)
      Owned mutexes:
      === Platform ===
      Last reset 00:25:45 ago, cause: power up
      Last software reset at 2020-12-06 13:51, reason: User, spinning module GCodes, a
      vailable RAM 11284 bytes (slot 1)
      Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR
      0xe000ed38 SP 0xffffffff Task 0x4e49414d
      Error status: 0
      Free file entries: 10
      SD card 0 detected, interface speed: 20.0MBytes/sec
      SD card longest block write time: 0.0ms, max retries 0
      MCU temperature: min 17.8, current 18.1, max 18.6
      Supply voltage: min 1.6, current 1.6, max 1.7, under voltage events: 0, over vol
      tage events: 0, power good: no
      Driver 0: ok, SG min/max not available
      Driver 1: ok, SG min/max not available
      Driver 2: ok, SG min/max not available
      Driver 3: ok, SG min/max not available
      Driver 4: ok, SG min/max not available
      Date/time: 1970-01-01 00:00:00
      Cache data hit count 2472230280
      Slowest loop: 200.74ms; fastest: 0.06ms
      I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets
      0
      === Move ===
      Hiccups: 0, FreeDm: 160, MinFreeDm: 160, MaxWait: 0ms
      Bed compensation in use: none, comp offset 0.000
      === DDARing ===
      Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0
      , 0
      === Heat ===
      Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
      === GCodes ===
      Segments left: 0
      Stack records: 2 allocated, 0 in use
      Movement lock held by null
      http is idle in state(s) 0
      telnet is idle in state(s) 0
      file is idle in state(s) 0
      serial is ready with "m122" in state(s) 0
      aux is idle in state(s) 0
      daemon is idle in state(s) 0
      queue is idle in state(s) 0
      autopause is idle in state(s) 0
      Code queue is empty.
      === Network ===
      Slowest loop: 0.17ms; fastest: 0.01ms
      Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
      HTTP sessions: 0 of 8

      • WiFi -
        Network state is starting
        WiFi module is disabled
        Failed messages: pending 0, notready 0, noresp 4
        Socket states: 0 0 0 0 0 0 0 0
        ok
      Phaedruxundefined 1 Reply Last reply Reply Quote 0
      • GPetropoulosundefined
        GPetropoulos
        last edited by GPetropoulos

        Also not sure if it is normal, but before the blue led was on. Now on usb only it is not.
        WhatsApp Image 2020-12-06 at 21.16.01.jpeg
        WhatsApp Image 2020-12-06 at 21.16.10.jpeg

        1 Reply Last reply Reply Quote 0
        • GPetropoulosundefined
          GPetropoulos @Phaedrux
          last edited by

          @Phaedrux Also I checked the link for the remembered list/networks, as I still have the M587 in the config.g
          I only access the printer from the web interface. I do not understand how it will work if the command to enable the wifi is not in the config.g
          How can I send a macro to it if it does not connect first?

          A Former User? Phaedruxundefined 2 Replies Last reply Reply Quote 0
          • A Former User?
            A Former User @GPetropoulos
            last edited by

            @GPetropoulos said in My duet wifi does not connect to the wifi.:

            I do not understand how it will work if the command to enable the wifi is not in the config.g

            you enable the network with m552 s1 m587 is for storing the network details, this only needs to be done once.

            @GPetropoulos said in My duet wifi does not connect to the wifi.:

            Also not sure if it is normal, but before the blue led was on. Now on usb only it is not.

            blue light is to indicate Vin, so it will not light when using only usb

            1 Reply Last reply Reply Quote 1
            • Phaedruxundefined
              Phaedrux Moderator @GPetropoulos
              last edited by

              @GPetropoulos said in My duet wifi does not connect to the wifi.:

              WiFi -
              Network state is starting
              WiFi module is disabled
              Failed messages: pending 0, notready 0, noresp 4
              Socket states: 0 0 0 0 0 0 0 0
              ok

              Can you send M552 S0 and then M552 S1?

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator @GPetropoulos
                last edited by

                @GPetropoulos said in My duet wifi does not connect to the wifi.:

                I still have the M587 in the config.g

                I fear that having that in the config has caused the module flash to burn out from constantly re-writing the SSID and password at every power up.

                Z-Bot CoreXY Build | Thingiverse Profile

                GPetropoulosundefined 1 Reply Last reply Reply Quote 0
                • GPetropoulosundefined
                  GPetropoulos @Phaedrux
                  last edited by

                  @Phaedrux M552 S0
                  ok
                  M552 S1
                  Turn off the current WiFi mode before selecting a new one
                  ok
                  M552
                  WiFi module is being started

                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    Can you try setting up the wifi module in access point mode to see if the module is working at all?

                    https://duet3d.dozuki.com/Wiki/Gcode#Section_M589_Configure_access_point_parameters

                    Z-Bot CoreXY Build | Thingiverse Profile

                    GPetropoulosundefined 2 Replies Last reply Reply Quote 0
                    • GPetropoulosundefined
                      GPetropoulos @Phaedrux
                      last edited by

                      @Phaedrux m552 s2
                      Turn off the current WiFi mode before selecting a new one
                      ok
                      m552 s-1
                      WiFi module stopped
                      ok
                      m552 s2
                      ok
                      M589 S"DuetSSID" P"password" I"192.168.0.1" C1
                      M589: Bad or missing parameter
                      ok

                      Phaedruxundefined 1 Reply Last reply Reply Quote 0
                      • GPetropoulosundefined
                        GPetropoulos @Phaedrux
                        last edited by

                        @Phaedrux Does this mean it is bricked?
                        Unfortunately I had not seen that you should not use the M587 in the config.g and should be something added at a later time than last year we were talking.

                        Is there any chance my firmware is old and this does not work due to that?
                        I have not updated the firmware for sometime.

                        I had ordered directly from duet3d.com on 09/12/18

                        1 Reply Last reply Reply Quote 0
                        • Phaedruxundefined
                          Phaedrux Moderator @GPetropoulos
                          last edited by

                          @GPetropoulos said in My duet wifi does not connect to the wifi.:

                          I"192.168.0.1"

                          Try without the quotes around the ip address. The example in the wiki may need to be updated.

                          Z-Bot CoreXY Build | Thingiverse Profile

                          GPetropoulosundefined 1 Reply Last reply Reply Quote 0
                          • GPetropoulosundefined
                            GPetropoulos @Phaedrux
                            last edited by

                            @Phaedrux Yes it sent a different answer now.

                            m552 s-1
                            WiFi module stopped
                            ok
                            m552 s2
                            ok
                            M589 S"DuetSSID" P"password" I192.168.0.230 C1
                            M589: Failed to configure access point parameters
                            ok

                            1 Reply Last reply Reply Quote 0
                            • Phaedruxundefined
                              Phaedrux Moderator
                              last edited by

                              If the access point mode doesn't work after removing the quotes from the ip address you can try reflashing the wifi server firmware by sending M997 S1

                              Z-Bot CoreXY Build | Thingiverse Profile

                              GPetropoulosundefined 1 Reply Last reply Reply Quote 0
                              • GPetropoulosundefined
                                GPetropoulos @Phaedrux
                                last edited by

                                @Phaedrux said in My duet wifi does not connect to the wifi.:

                                M997 S1

                                This is what I get

                                M997 S1
                                Trying to connect at 230400 baud: failed
                                Trying to connect at 115200 baud: failed
                                Trying to connect at 74880 baud: failed
                                Trying to connect at 9600 baud: failed
                                Error: Installation failed due to comm write error
                                ok

                                1 Reply Last reply Reply Quote 0
                                • Phaedruxundefined
                                  Phaedrux Moderator
                                  last edited by

                                  Will have to see what @dc42 thinks.

                                  Z-Bot CoreXY Build | Thingiverse Profile

                                  1 Reply Last reply Reply Quote 0
                                  • Phaedruxundefined
                                    Phaedrux Moderator
                                    last edited by

                                    If the module has failed, it is replaceable with the right skills and tools.

                                    Z-Bot CoreXY Build | Thingiverse Profile

                                    GPetropoulosundefined 1 Reply Last reply Reply Quote 0
                                    • GPetropoulosundefined
                                      GPetropoulos @Phaedrux
                                      last edited by

                                      @Phaedrux Well I don't have the skills or the tools for such an operation 😄

                                      1 Reply Last reply Reply Quote 0
                                      • A Former User?
                                        A Former User
                                        last edited by

                                        If you have a maker space or hacker space nearby they might be able to help. Search the forum for "community repair" to see if any of the listed forum users are nearby and able to assist with repair. Alternatively you could try converting to using a Raspberry Pi like the Duet 3 (but the firmware for that is still beta, and it will require some custom wiring), there are a few threads here on using a Pi and DSF with Duet2Wifi as well if you search

                                        GPetropoulosundefined 1 Reply Last reply Reply Quote 1
                                        • GPetropoulosundefined
                                          GPetropoulos @A Former User
                                          last edited by

                                          @bearer Thank you for your feedback. Thus I do not have a makerspace near me. I am in a smaller town where 3D Printing is not so adopted.
                                          I would not like to go for experiments. I like my duet and I wish to keep using that.

                                          1 Reply Last reply Reply Quote 0
                                          • GPetropoulosundefined
                                            GPetropoulos
                                            last edited by

                                            @dc42 What do you think? Is it bricked?
                                            What are my options here?

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA