Cancel print
-
When I press the Cancel print button, I kind of expect the print to be cancelled, heaters to be switched off and the printer reset to Home.
That last point doesn't happen. I need to switch pages, and find the Home All button.
Is there a way for me to modify the functionality of the button? Or is it baked in? -
Put the codes you want the printer to do in the sys/stop.g file.
-
Actually it's the cancel.g file that gets run when a print is cancelled. If it isn't found then the motors and heaters are turned off but the head is not moved.
-
And if you don't turn off heaters in the cancel.g file, but you do have a cancel.g file (with g28, for eg) the heaters don't turn off. I like this feature very much, as I manually set Z height and so having the heaters remain on saves time when restarting a print to adjust z height.
