Duet 5 mini Feedback

jay_s_uk

@chrishamm could you push 3.2.0 to github please

A Former User

@jay_s_uk said in Duet 5 mini Feedback:

@chrishamm could you push 3.2.0 to github please

you can find 3.2.0 Here

Veti

@chrishamm

@Veti said in Duet 5 mini Feedback:

z probe input pin
i would assume that it could also be io1-io3. io6 works as well. so maybe io0-6

zprobe in is now temp0-2 and io3. that is wrong

PCR

@CaLviNx its for modifying it for the LPC/STM32 Project. So @jay_s_uk need the source Files

Veti

Everything is connected and the printer is running fine now.

So the printer has the duet mini 5+
BLV metal kit.
Blind joints
SFU1204 Ball screws with metal mounting
BMG Wind direct drive extruder
X and Y 2A motors to push the TMC2209

Just some more cable management to do.

A Former User

@Veti

Why are the belts twisted?

zapta

@CaLviNx said in Duet 5 mini Feedback:

I'm told my mini 5 is sitting in "customs" in larnaca so until i actually get my hands on it i cant comment as to whether 3.3 & 5v are swapped or not,

No need to wait, since it's open source hardware, you can check the design files on github.

"Open Hardware. All the hardware designs are licensed under the CERN OHL 1.2. The design files are released on GitHub." https://www.duet3d.com/

Veti

@CaLviNx said in Duet 5 mini Feedback:

Why are the belts twisted?

so that the smooth side of the belt runs across the idlers.
its part of the blv cube design.

A Former User

@zapta said in Duet 5 mini Feedback:

@CaLviNx said in Duet 5 mini Feedback:

I'm told my mini 5 is sitting in "customs" in larnaca so until i actually get my hands on it i cant comment as to whether 3.3 & 5v are swapped or not,

No need to wait, since it's open source hardware, you can check the design files on github.

"Open Hardware. All the hardware designs are licensed under the CERN OHL 1.2. The design files are released on GitHub." https://www.duet3d.com/

I'm lost what has this got to do with Cypriot customs trying to screw me?

And if as has been proven the diagram was wrong what's to say the design files on git hub can't also be wrong

zapta

@CaLviNx said in Duet 5 mini Feedback:

the design files on git hub can't also be wrong

The boards are manufactured from the design files so should match.