SOLVED Dull 1st and top layer
Can someone tell me why this happens. I frequently get dull finish. On top and first layer. Any idea why??
Ran temp beteen 220 and 230
Print temp from manufacturer is 220 tp 250
Stephen6309 last edited by
@ziggymanpopo With PLA, I've found the hotter you print it at, the shinier it gets.
Phil Maddox last edited by
You never really know if your thermistor is accurate or not so treat manufacturer recommended temperature data carefully.
When ever i get new filament i always print a temp tower ( https://www.thingiverse.com/thing:2493504) at 30mm/s to get a reasonable starting point.
Experimenting with the part cooling fan is worthwhile too.
Thanks for the input
Veti last edited by
also what thermistor are you using and whats your thermistor config?