Feedback wanted: conditional GCode without indentation

zapta

@fcwilt said in Feedback wanted: conditional GCode without indentation:

END by itself is easy but if you don't see it in context you don't know what it is the end of. It might be better to have unique keywords - ENDWHILE, ENDIF or something along those lines.
Frederick

One option is to annotate it with comments.

END ; while xyz

BTW, I am also not a fan of white space indentation having semantic meaning. It's too fragile, event with language specific editors that support it.

reghend79

I think both keyword-delimiting and indentation-delimiting should be permitted in the same file to allow for flexibility and varying degrees of clarity. I'm working on analyzing print data in Matlab to create feedback control, and I am quite fond of using both indentations and "end" statements at the same time. The indentations are not normally required in Matlab, but they're done automatically to help visualize the blocks.

zapta

@reghend79 said in Feedback wanted: conditional GCode without indentation:

The indentations are not normally required in Matlab, but they're done automatically to help visualize the blocks.

That's a good point, END should still allow indentation for code clarity, though the indentation would have no semantic impact. E.g. these code snippet should have the same meaning

            IF
     COMMAND1
  COMMAND2
COMMAND3
    END


IF
COMMAND1
COMMAND2
END


IF
    COMMAND1
    COMMAND2
    END

IF
    COMMAND1
    COMMAND2
END

fcwilt

@zapta said in Feedback wanted: conditional GCode without indentation:

One option is to annotate it with comments.

END ; while xyz

True but with specific keywords I'm forced to do the "right" thing.

Frederick

alankilian

Here's one way to "DO" it.

https://www.cnccookbook.com/cnc-g-code-macro-conditions-looping/

garyd9

@fcwilt said in Feedback wanted: conditional GCode without indentation:

@garyd9 said in Feedback wanted: conditional GCode without indentation:

Can you please give an example of a gcode sequence that would impractical with the current space delimiting blocks?

The issue is gcode files as generated by a slicer - not the files you would create yourself on the duet.

That doesn't answer the question. Without an example of the problem, it's difficult to give a reasonable opinion on a proposed solution.

bot

I think removing all indentation/whitespace from the syntax is a good idea. I also think a single END keyword is best. Multiple end keywords is just unnecessary. Keep track of the ENDs the same way one keeps track of the }s.

fcwilt

@garyd9 said in Feedback wanted: conditional GCode without indentation:

That doesn't answer the question. Without an example of the problem, it's difficult to give a reasonable opinion on a proposed solution.

As dc42 said in his opening post:

However, the need to indent the body of a conditional or loop makes it impractical to use a while-loop to create a looping GCode file, for example for a belt printer.

That seems clear enough.

Frederick

dc42

@garyd9 said in Feedback wanted: conditional GCode without indentation:

@fcwilt said in Feedback wanted: conditional GCode without indentation:

@garyd9 said in Feedback wanted: conditional GCode without indentation:

Can you please give an example of a gcode sequence that would impractical with the current space delimiting blocks?

The issue is gcode files as generated by a slicer - not the files you would create yourself on the duet.

That doesn't answer the question. Without an example of the problem, it's difficult to give a reasonable opinion on a proposed solution.

Suppose you generate a GCode file using a slicer. But you have a belt printer and you want to print it 10 times, with a belt movement between each iteration.

Using existing slicers, there is no way to use the slicer start and end scripts to achieve this.

You could achieve it by editing the GCode file, but then you would have to indent almost the whole GCode file so that it became the body of the while-loop.

If we offer the option to delimit if- and while-commands explicitly, then you could insert one line near the start of the file (the 'while' line), and one near the end (the 'end' line). You might even be able to put the 'while' line in your slicer start script, and the 'end' line in the end script, so that you don't need to edit the file at all.

Does that make the reason for this proposal clearer?

fcwilt

@bot said in Feedback wanted: conditional GCode without indentation:

Keep track of the ENDs the same way one keeps track of the }s.

'}' symbols are evil incarnate.

Frederick

bot

@fcwilt } // they don't seem so bad to me

tekkydave

@dc42 curly braces for me every time. I don't see the point of adding extra keywords that just take up space.

tekkydave

@fcwilt I once used a language called pl/9 that had a repeat...until. I miss it from every other language I've used since.

fcwilt

@tekkydave said in Feedback wanted: conditional GCode without indentation:

@fcwilt I once used a language called pl/9 that had a repeat...until. I miss it from every other language I've used since.

I never heard of PL/9 - I used PL/1 for a bit - it's looping syntax was flexible and consistent.

My programming language of choice is Delphi.

Frederick

fcwilt

@tekkydave said in Feedback wanted: conditional GCode without indentation:

@dc42 curly braces for me every time. I don't see the point of adding extra keywords that just take up space.

Keywords have a mnemonic value that isolated arbitrary symbols lack.

Frederick

garyd9

@dc42 said in Feedback wanted: conditional GCode without indentation:

Does that make the reason for this proposal clearer?

Yes, much clearer. Thank you.

I'm not familiar with belt printers and how this might be used - which left (and still leaves) my understanding lacking.

That being said, can the problem be addressed using macros? Can a print job's gcode use M28/M29 to create new files?

; ----- start gcode
;
; inital printer setup
; 
M28 job.gcode ; cause the actual gcode to be written to job.gcode
;
; ------- actual print gcode generated by slicer
;
; --------- end gcode
M29  ; stop/save job.gcode
;
;  -- here would be the loop for running the print job
while (some_condition)
       ; belt movement
       M32 job.gcode

<eof>

(I have no idea if a gcode file can use M28/m29 to create another gcode file, but if it can...)

theruttmeister

@dc42 said in Feedback wanted: conditional GCode without indentation:

@garyd9 said in Feedback wanted: conditional GCode without indentation:

@fcwilt said in Feedback wanted: conditional GCode without indentation:

@garyd9 said in Feedback wanted: conditional GCode without indentation:

Can you please give an example of a gcode sequence that would impractical with the current space delimiting blocks?

The issue is gcode files as generated by a slicer - not the files you would create yourself on the duet.

That doesn't answer the question. Without an example of the problem, it's difficult to give a reasonable opinion on a proposed solution.

Suppose you generate a GCode file using a slicer. But you have a belt printer and you want to print it 10 times, with a belt movement between each iteration.

Using existing slicers, there is no way to use the slicer start and end scripts to achieve this.

You could achieve it by editing the GCode file, but then you would have to indent almost the whole GCode file so that it became the body of the while-loop.

If we offer the option to delimit if- and while-commands explicitly, then you could insert one line near the start of the file (the 'while' line), and one near the end (the 'end' line). You might even be able to put the 'while' line in your slicer start script, and the 'end' line in the end script, so that you don't need to edit the file at all.

Does that make the reason for this proposal clearer?

That could be simplified down to a gcode command that executed a specific .gcode file multiple times:
Mxxx thisprintjob.gcode S10
For example.
That has the advantage of not needing anything like the complexity of conditionals.

I think the fact that it is a programming loop is making people think that the solution is to create the ability in g-code to code loops. Where as in fact for the described use case at least, its not really a loop, its just a way to not have the file be 10 times longer than it needs to be.

At there other things that actually are conditional and not just 'do x, y number of times'?

(in fact, all this could be done in DWC... which in some ways makes more sense).

zapta

@fcwilt said in Feedback wanted: conditional GCode without indentation:

'}' symbols are evil incarnate.

The Duet's firmware is full of them, don't bring it into your home.

https://github.com/Duet3D/RepRapFirmware/blob/dev/src/Movement/DriveMovement.cpp

garethky

end is fine
I would pick just 1 way to do it, even if that way breaks existing code. Now is the time to make breaking changes. I don't want to imagine a) what tricky things users will think up to fool themselves b) what implementation bugs will arise due to the complexity of having 2 ways to do it.
As a software engineer, this question makes my skin crawl. I really wouldn't do anything for whole files, just blocks. But if you really want to mix both styles, I would do this: require unintended blocks to have a begin and end keywords, on their own lines, to delimit the block. That way begin/end can be used with all of the existing block types without renaming them (the names are perfectly good as-is).

if foo == bar
    begin  
; begin unruly slicer generated gcode
G10
G1 X50 Y50 F5000
; and so on ...
    end

This is basically a friendlier versions of parens{<block>}. You could also postfix the if statement with python's : to indicate an unintended block start but this is so subtle and easy to miss that I think it is visiting an evil on the intended audience.

Visual Basic has "OrElse" and "AndAlso", because they refused to re-define the meaning of "or" and "and". Don't be Visual Basic.

fcwilt

@zapta said in Feedback wanted: conditional GCode without indentation:

The Duet's firmware is full of them, don't bring it into your home.

That's why I perform a ritual "cleansing" of the boards before I use them in a printer.

Better safe than sorry.

Frederick