Use PrusaSlicer with pspp, temperature management issues
My E3D Toolchanger is still debugging so far. Currently my machine only has two nozzles. My slicing software is PrusaSlicer 2.3.0, used with pspp, but I encountered a problem during the debugging process:
Two print heads printing:
When the No. 0 nozzle is activated, the working temperature of No. 0 nozzle is 200 and the idle temperature of No. 1 nozzle is 170.
However, when the No. 1 nozzle is activated, the working temperature of the No. 1 nozzle is also 170. The idle temperature of the No. 0 nozzle is 170 normal.
I checked the parameter settings of my PrusaSlicer, and the working temperature of the print head is 200.
Please check my configuration parameters:
May I ask what causes this?
Looking forward to your reply.
Sorry, what is pspp?
Can you post your config.g and tool change files? Perhaps a sample of the gcode that is being used so we can see what is happening?
What firmware version?
@phaedrux Hello Phaedrux,
Thank you for your reply.
pspp is Tool Changer Prusa Slicer post process cript. Its github address is: https://github.com/mkudzia84/toolchanger-pspp/tree/master
I am currently on a business trip and do not have a configuration file in my hand. I will release it to you when I get home. The firmware version is v3.1.1.
The firmware I currently use is the configuration file of Nibbels, and the github address is: https://github.com/Nibbels/e3d-toolchanger-config/tree/master