Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Heatbed and PID

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    18
    1.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • StaticRedundefined
      StaticRed @Phaedrux
      last edited by

      @phaedrux Yes for basically all the questions. I once let it run 3 hours, but then stoped it because i had to go away. The PID for the hotend works perfectly tho. I get really like 0 degree variation. But on the bed i just cant get it working.

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Can you post a photo of the bed assembly?

        150x150x6mm and 300W of AC power should heat up fairly quickly, but maybe takes a lot longer to cool down. That's usually what the tuning cycle is waiting for the longest.

        Z-Bot CoreXY Build | Thingiverse Profile

        StaticRedundefined 1 Reply Last reply Reply Quote 0
        • StaticRedundefined
          StaticRed @Phaedrux
          last edited by

          @phaedrux alt text so this is what my bed assembly is looking like. Yes it needs kind of long to cool down.

          1 Reply Last reply Reply Quote 0
          • Phaedruxundefined
            Phaedrux Moderator
            last edited by

            Is that a Voron0? Closed sides but open top?

            Z-Bot CoreXY Build | Thingiverse Profile

            StaticRedundefined 1 Reply Last reply Reply Quote 0
            • StaticRedundefined
              StaticRed @Phaedrux
              last edited by

              @phaedrux its a selfmade printer. Yes sides are closed by now, but top will get enclosed some time soon aswell.

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                I believe there is plans to make the tuning cycle time limitable in such cases. Not sure when that's coming though.

                As it is, you can probably get a good tune from it by letting it play out, though with a lot of heat retention that could take awhile.

                Z-Bot CoreXY Build | Thingiverse Profile

                StaticRedundefined 3 Replies Last reply Reply Quote 0
                • StaticRedundefined
                  StaticRed @Phaedrux
                  last edited by

                  @phaedrux okay i will let it run trough now, im home all day so i hope it does not take like 10 hours xD

                  1 Reply Last reply Reply Quote 0
                  • StaticRedundefined
                    StaticRed @Phaedrux
                    last edited by

                    @phaedrux so after a bit i got this message this time
                    Warning: heater behaviour was not consistent during tuning
                    Auto tuning heater 0 completed after 6 idle and 25 tuning cycles in 2735 seconds. This heater needs the following M307 command:
                    M307 H0 R1.189 C136.8 D6.60 S1.00 V23.8
                    Edit the M307 H0 command in config.g to match this. Omit the V parameter if the heater is not powered from VIN.

                    1 Reply Last reply Reply Quote 0
                    • StaticRedundefined
                      StaticRed @Phaedrux
                      last edited by

                      @phaedrux okay so i was able to fix it. I let it run trough for like 4h, then i had it oscilating, so i rised the d value a bit and now im getting a stable temp.

                      1 Reply Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator
                        last edited by

                        Glad you got it. A little manual nudging to get it stable is pretty common. The tuning algorithm is still being improved upon to better deal with the edge cases like very large beds or very high powered heaters or chamber heaters etc.

                        Z-Bot CoreXY Build | Thingiverse Profile

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA