Superfly Mount for Smart Effector | Idea

[PCR]

Hello,

before i start doing some design on a mount for the:

https://www.thingiverse.com/thing:4841682

extruder i want to ask if someone already working on one? If not i will start some CAD work next week

Best

[o_lampe]

@pcr
@mrac1 and @garyd9 and some others have been working on it. See here starting at post #24

[PCR]

@o_lampe but its for the orbiter Not the superfly

[o_lampe]

@pcr
Actually the design is based on the Sherpa Mini
But they all use BMG gears (with Orbiter motor), but without planetary gears from the Orbiter.
And they seem to require a wider rod-spacing or higher adapter to clear the rods.

Here is a teaser of my ongoing experiement, trying to free some space between the rods.
It's too early so say anything.